Just greatly improved temps!

Printable View

11-14-2005, 06:58 PM
kenrippy

Just greatly improved temps!

this is no secret, and no real suprise to me....but i just had to show the effects of the side blow hole i just installed. this has dropped cpu temps about 15c during prime95 (now 40c as i type w/ prime going)

just goes to show the benefits of a side intake over the cpu. i used a cd spindle cover cut down and hot glued to on the 4 corners of the fan. not exactly the prettiest, but it does the job well. it may look like there's a gap between the window and the shroud, but it's just an optical illusion because the hole is off center a little. and if you're wondering about a fan grill, it only increases noise so i'm not going to use one.

https://www.sharkyforums.com/
11-14-2005, 07:02 PM
phelan1777

Whats the CFM on that?
11-14-2005, 07:08 PM
kenrippy

Maker: Panaflo (Panasonic)
Model: FBA12G12L1A
Size: 120 x 120x 38 (mm)
Bearing: Hydro Wave
Voltage: 12V
Speed: 1700 rpm
Air Flow: 68.9 CFM
Noise Level: 30.0dBA

edit: idle temps are really good too
4400+ X2 @ 250x10 (2.5ghz)
CPU= 32c
MB= 39c
11-14-2005, 07:28 PM
phelan1777

where did you get it, and about how much?

If I put two of those in my cheiftech server tower if would do wonders for my cooling
11-14-2005, 07:32 PM
I4one

you da man ;)

btw - do you have the fan blowing air DOWN onto the CPU (intake) -- or blowing OUT (exhaust), taking the heat away (<--my guess)
11-14-2005, 07:35 PM
kenrippy

Quote:

Originally Posted by I4one

you da man ;)

btw - do you have the fan blowing air DOWN onto the CPU (intake) -- or blowing OUT (exhaust), taking the heat away (<--my guess)

nope, always best to have cool outside air blown over the heatsink (intake)
11-14-2005, 07:38 PM
kenrippy

Quote:

Originally Posted by phelan1777

where did you get it, and about how much?

If I put two of those in my cheiftech server tower if would do wonders for my cooling

$15 ea. and they don't come with any connectors, just 2 bare leads.
http://www.svcompucycle.com/fba12g12l1a.html
11-15-2005, 12:30 AM
Interfire

Hey that looks pretty good, nice job.
11-26-2005, 11:01 AM
mellojoe

I like it. You know, you could get some of that aluminum framing stuff to make it "prettier". Or even some of that rubber weather stripping stuffs. That would clean up the edges for you.

Looks good, though!
11-26-2005, 12:38 PM
kenrippy

thanks, it's working out well as it is. temps are great.
11-26-2005, 02:01 PM
ronopp007

hey this aint on topic but what memory u running in there?
11-26-2005, 02:14 PM
kenrippy

Quote:

Originally Posted by ronopp007

hey this aint on topic but what memory u running in there?

ballistix pc4000 250x10 1T
11-26-2005, 09:08 PM
ronopp007

I bought corsair xms 2 x 1gig its on their list of approved mem, do you think it will boot correctly, or should I stick one stick in then change the mem settings in bios to manual and up the voltages first ? again sorry for hijacking the thread!!
11-26-2005, 09:18 PM
kenrippy

Quote:

Originally Posted by ronopp007

I bought corsair xms 2 x 1gig its on their list of approved mem, do you think it will boot correctly, or should I stick one stick in then change the mem settings in bios to manual and up the voltages first ? again sorry for hijacking the thread!!

pop em both in and boot up in auto first, then reboot and mess with stuff. at least that's probably the way i'd go about it.
11-26-2005, 09:22 PM
ronopp007

reason I was asking is that there have been some reported boot issues with the A8n-sli Premium boards. and the work around was to put a single stick in...mabey I should start like its gonna work then use the workaround IF i Have to.:)
11-26-2005, 09:32 PM
kenrippy

yeah i'd do that. i had no problems off the bat w/ the ballistix in dual channel. i started tweaking the ram & multipliers after i got windows setup.