Printable View
I've been seeing reports around the net that some folks are having trouble with unlocked 1.2 TBirds posting on kt133a mobos as the mobos want to post with default multiplier (12X) at 133 which is too high for most of these chips. Can anyone conform this or not? Thanks.
Fat Elvis
[This message has been edited by Fat Elvis (edited February 02, 2001).]
its way to much...i run mine at 110 with no extra voltage...1.792
I've got to say it, these tbirds are no overclockers dream...goodluck with whatever your up to
------------------
System
AMD Thunderbird K7 [email protected] (11x multiplier)
Golden Orb SUPER HSF
ASUS A7V ATA100 1005a bios
ATI Radeon 64M DDR VIVO 166/166 @ 203/203
256m PC133 @ 147
60Gb QTM 7200rpm/13.1Gb QTM 7200rpm
C.Labs 52x CD-ROM
Richo 8x4x32x CD-RW
Logitech Mouseman Optical
C.Labs SB Live! Value
D-Link PCI 538 10/100Mbps
19" Optiquest Q95
Win 98 S.E
- I think my men can take care of one little penguin. - No Mr. Gates, your men are already dead. -
All I've heard thus far is positive results with the 133mhz boards.Quote:
Originally posted by Fat Elvis:
I've been seeing reports around the net that some folks are having trouble with unlocked 1.2 TBirds posting on kt133a mobos as the mobos want to post with default multiplier (12X) at 133 which is too high for most of these chips. Can anyone conform this or not? Thanks.
Fat Elvis
[This message has been edited by Fat Elvis (edited February 02, 2001).]
------------------
OC Knight
OC Crusaders
Every dark heart begins with but a single seed of hate.
I OC therefore I am, I tweak, therefore I be.
From what I'm reading, it doesn't seem like the problem is with the chip...its with the motherboard. The mobos are wanting to initially post at like ~1.6 GHz (12x133) and so folks are having problems with them. I'm just trying to confirm this as I am in the market for a new mobo/cpu. If this is a problem, it is something I want to steer clear of.....Quote:
Originally posted by Subnova:
its way to much...i run mine at 110 with no extra voltage...1.792
I've got to say it, these tbirds are no overclockers dream...goodluck with whatever your up to
You have to take the multiplyer and lower it in order to utilize the cpu running at 133MHz instead of 100MHz. If you have a 1.2G t-bird then you have to set the multiplyer at 9 in order for the processor to run at 1200MHz. This is not a bad thing, it will increase the t-birds performance signifacantly, and it is an overclockers dream.
------------------
750 Athlon Classic O\C to 1090MHz (going for the 1.1G)
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on
Colt where have you been man? You just dissapeared for like the last month =-pQuote:
Originally posted by Colt:
You have to take the multiplyer and lower it in order to utilize the cpu running at 133MHz instead of 100MHz. If you have a 1.2G t-bird then you have to set the multiplyer at 9 in order for the processor to run at 1200MHz. This is not a bad thing, it will increase the t-birds performance signifacantly, and it is an overclockers dream.
------------------
OC Knight
OC Crusaders
Every dark heart begins with but a single seed of hate.
I OC therefore I am, I tweak, therefore I be.
I think maybe he understands that, he may be saying that the board wants to default to that so the board won't even post long enough to change the multiplier,Quote:
Originally posted by Colt:
You have to take the multiplyer and lower it in order to utilize the cpu running at 133MHz instead of 100MHz. If you have a 1.2G t-bird then you have to set the multiplyer at 9 in order for the processor to run at 1200MHz. This is not a bad thing, it will increase the t-birds performance signifacantly, and it is an overclockers dream.
I would think that you would have to POST the board/chip at default, then go in on a reboot and change the multiplier down and FSB up.
------------------
OC Crusaders
P3 700@945 (135x7.0 1.7V)
Asus CUV4X
128MB PC150 (2-2-2)
Viper 770 @ 144/164 core/mem
SBLive! Value
13.5GB Maxtor ATA100 (5400RPM)
Memorex 36X CD-ROM
Aiwa 10GB Tape Backup
SCSI ZIP 100MB
Linksys 10/100 NIC
Been gearing up for a new case mod overclocking adventure, it is going to be wild. Been working allot to cover the cost.Quote:
Originally posted by Vindir:
Colt where have you been man? You just dissapeared for like the last month =-p
I am writing an article about it, it is going to be done with the Abit KT7a Raid board and the Athlon 1G. Man it will be one of a kind, going to try to get cpu down to at least -20C with pelts and pelt cooled water, with nothing outside the case except an extra 24V power supply to handle the 172 Watt pelt on the cpu.
------------------
750 Athlon Classic O\C to 1090MHz (going for the 1.1G)
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on
Quote:
Originally posted by Colt:
Been gearing up for a new case mod overclocking adventure, it is going to be wild. Been working allot to cover the cost.
I am writing an article about it, it is going to be done with the Abit KT7a Raid board and the Athlon 1G. Man it will be one of a kind, going to try to get cpu down to at least -20C with pelts and pelt cooled water, with nothing outside the case except an extra 24V power supply to handle the 172 Watt pelt on the cpu.
Awesome https://www.sharkyforums.com/images/.../2005/06/5.gif Stop by some when you get some free time https://www.sharkyforums.com/images/.../2005/06/5.gif We could really use you around here. Where will you be putting up the article? I'd love to read about some of your work.
------------------
OC Knight
OC Crusaders
Every dark heart begins with but a single seed of hate.
I OC therefore I am, I tweak, therefore I be.
Your probably right on that me misunderstanding, read it fast, you are correct in posting at default then rebooting except its not the fsb you change it is the cpu you change from 100MHz to 133MHz, then change the ram speed to 133MHz. if it boots good then start uping your fsb.Quote:
Originally posted by Un4given:
I think maybe he understands that, he may be saying that the board wants to default to that so the board won't even post long enough to change the multiplier,
I would think that you would have to POST the board/chip at default, then go in on a reboot and change the multiplier down and FSB up.
------------------
750 Athlon Classic O\C to 1090MHz (going for the 1.1G)
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on
My new server case should be in next week so it will start in about ten days, picked up the motherboard today, am deciding on the ram now will order that this weekend. Here is a link to the case I am using, it is awsome, http://www.amtrade.com/computer/inte...r_cabinets.htm The ideas I have for it is going to be a one of as kind. I will post the link I am writing it for next week when I start.Quote:
Originally posted by Vindir:
Awesome https://www.sharkyforums.com/images/.../2005/06/5.gif Stop by some when you get some free time https://www.sharkyforums.com/images/.../2005/06/5.gif We could really use you around here. Where will you be putting up the article? I'd love to read about some of your work.
Thanks for letting me know I was missed : )
Will be hanging around more often soon, just trying to wrap up loose ends.
------------------
750 Athlon Classic O\C to 1090MHz (going for the 1.1G)
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on
[This message has been edited by Colt (edited February 03, 2001).]
Can't wait https://www.sharkyforums.com/images/.../2005/06/5.gif That's a monster case. Course you were missed, I was actually just thinking you'd be pretty useful with all these guys asking how to get just a few more mhz out of their FSB lately.Quote:
Originally posted by Colt:
My new server case should be in next week so it will start in about ten days, picked up the motherboard today, am deciding on the ram now will order that this weekend. Here is a link to the case I am using, it is awsome, http://www.amtrade.com/computer/inte...r_cabinets.htm The ideas I have for it is going to be a one of as kind. I will post the link I am writing it for next week when I start.
Thanks for letting me know I was missed : )
Will be hanging around more often soon, just trying to wrap up loose ends.
------------------
OC Knight
OC Crusaders
Every dark heart begins with but a single seed of hate.
I OC therefore I am, I tweak, therefore I be.
Colt i could of really used your help a couple of weeks ago. Good luck on the case mod , we know it will be sick https://www.sharkyforums.com/images/.../2005/08/2.gif
------------------
Baron Von FaTs
OC Crusaders
Celeron 600@1144
Duron 650@1030 (not mine)
T-Bird 1100@1272
Guys next time e-mail me if you have any questions and let me know that it was asked in the forum and I will check and help if I can. Sorry did not mean to abandon ship like that.
------------------
750 Athlon Classic O\C to 1090MHz (going for the 1.1G)
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on
I might not have a 1.2 ghz cpu.
But my KT7a motherboard isnt giving me any stability @ 133/33 fsb.
All this 133 fsb support is hyped.
Though i must admit that im using win2k and it is not the most hardware friendly OS.
Quote:
Originally posted by pnut33:
I might not have a 1.2 ghz cpu.
But my KT7a motherboard isnt giving me any stability @ 133/33 fsb.
All this 133 fsb support is hyped.
Though i must admit that im using win2k and it is not the most hardware friendly OS.
So what kind of memory are you using?? If it is not that great, even if it says pc133 does not mean that it will run at 133MHz stable, also is your cas set at 2 or 3, do you have turbo mode on for the memory, there are way to many factors to judge how good 133/33 is by just your board. I am running an athlon classic at 133 at cas2 and man I noticed the diffferance and to me it is worth it. And I am stable as hell. Just a note though if I put in my classic athlon 650 the comp is unstable on cas2 but fine on cas3. Play with the bios, up your I/O, you just might find your time will pay off.
------------------
750 Athlon Classic O\C to 1090MHz (going for the 1.1G)
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on
I haven't had any problems setting my CPU up with the 9x133 setting. If your computer is posting at 12x133 (or won't post because of this) then clear the CMOS by moving the little jumper (check the manual for the location) over for a few seconds and then back. It should boot up at 6x100 and then you can go into the BIOS and set it up at 9x133.
------------------
AMD 1.2GHz T-Bird 266MHz FSB (9x133, trying for higher OC)Cooled by BigMoFoHo HSF
KT7A-RAID
256MB PC133 CAS2 ECC RAM
All-In-Wonder Radeon 32MB DDR
Soundblaster Live Platinum 5.1
Custom Built Madisound LEAP designed speakers
Pioneer 16x DVD
Sony Spressa 12x8x32 CD-RW
2-45GB IBM DeskStar 75GXP HD in RAID-0
Tornado 1000 Case
hey guys, i only have a small amount of time so i'll be brief (they do have computers in Pennsylvania).
I have 256MB of Crucial's 2-2-2 PC133 7.5ns, a TBird 1.1, and a KT7A-RAID with the Abit northbridge cooling. I did not have an OS installed, but I was able to get 310MHz FSB out of it, no problem. PCI devices are my Maxtor ATA/66 13.6GB 7200RPM drive, Hitachi GD5000 8x IDE DVD, HP 9300i 10x4x32x IDE CDRW. SB Live Value, Dxr2 DVD Decoder, 3Com 3CR990-TX-97 NIC w/ 3XP Processor. Once again I do not have an OS installed, but I was able to POST, and could boot to a bootable CD. Still, I could get 8 x 155 FSB out of it, with my taisol CKG with the 30CFM fan (40 celcius). That bastard sliced my right ring finger. OW! The blade went in deep too. Anyway, the point of this post was to say 266MHz FSB support for the KT133A is not at all hype. I can get 1240MHz out of it on a 310MHz FSB. Sure, it's only a 140MHz OC of the default core, but its a 110MHz OC of the front side bus.
------------------
iamsostupid.
1st order Sapasion's OC Knights
Whoever attacks first is the first to admit that all his ideas have given him out.
Great method and explanation. Hats off to you.Quote:
Originally posted by Samjham:
I haven't had any problems setting my CPU up with the 9x133 setting. If your computer is posting at 12x133 (or won't post because of this) then clear the CMOS by moving the little jumper (check the manual for the location) over for a few seconds and then back. It should boot up at 6x100 and then you can go into the BIOS and set it up at 9x133.
------------------
750 Athlon Classic O\C to 1090MHz (going for the 1.1G)
Water cooled pelts
Abit KA7-100
256MB Micron Running at 133MHz cas 2
Voodoo5 5500
Kenwood 72x
Sound Blaster Live Gamer
Cambridge Soundworks 5.1 Digital Speaker System
Yamaha 8\4\24 Burner
And the list goes on