-
Catfish
New heatsink
Well, i just installed my 800a with AS3 and my load temps are much better than they were with my volcano 9 with AS3, with smart fan 2 at about 4000 RPM's for both (around 48-50c as opposed to 57c with the volcano). Very cool.
-
Hammerhead Shark
Your temps should be much lower than that yet... i would say you are doing something wrong when putting that thing on. My temps at over 2400mhz with 2.1v on the cpu never break 45c and that is with a smartfan II and an slk-900a (not much different from 800).
Alpha Dir of The Coolers Guild
System 1:
Athlon XP 2400+ Mobile 243x10.5 (everyday use)
SLK-900a w/92mm Tornado
Radeon 9700pro 405/355
DFI Infinity Ultra
2x256mb Twinmos PC3700
80GB Segate 7200 8MB Cache
Klipsch Promedia 4.1's
Radeon 9700Pro - 19975 3dmark Compare
System 2:
Athlon XP 2600+ 166x13
AX-7 w/80mm 50cfm Sunon
ATI Radeon 8500LE
Epox 8RDA v1.1
2x256MB Kingston HyperX PC3000
Looking to buy: Retail HSF off of a BFG 5900nu
-
Catfish
Well how fast are you running your fan? I'm not running full speed, and when i posted that i had just put it on, we'll see if the temps lower any.
-
Hammerhead Shark
my fan is full speed, but that is only 1100 rpm more than what you are running at... which shouldnt make THAT much of a difference.
Alpha Dir of The Coolers Guild
System 1:
Athlon XP 2400+ Mobile 243x10.5 (everyday use)
SLK-900a w/92mm Tornado
Radeon 9700pro 405/355
DFI Infinity Ultra
2x256mb Twinmos PC3700
80GB Segate 7200 8MB Cache
Klipsch Promedia 4.1's
Radeon 9700Pro - 19975 3dmark Compare
System 2:
Athlon XP 2600+ 166x13
AX-7 w/80mm 50cfm Sunon
ATI Radeon 8500LE
Epox 8RDA v1.1
2x256MB Kingston HyperX PC3000
Looking to buy: Retail HSF off of a BFG 5900nu
-
Catfish
ok, as of now, after the AS3 settled, my load temps are at about 44-45c (running Prime for about 5 hours)
-
Running Man
Originally posted by Stryfe -13
ok, as of now, after the AS3 settled, my load temps are at about 44-45c (running Prime for about 5 hours)
What is your case temp?
-
Catfish
right now, at idle, mbm5 reads 22c aux, 28c, mainboard, and 33c cpu
and i have no idea on room temps, but it's 45F outside and i have my window open
Last edited by Stryfe -13; 11-01-2003 at 05:46 AM.
-
Running Man
Originally posted by Stryfe -13
right now, at idle, mbm5 reads 22c aux, 28c, mainboard, and 33c cpu
and i have no idea on room temps, but it's 45F outside and i have my window open
If your case temperature is 28c and your CPU temperature is 33c you have great temps.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|