My new receiver................. - Page 3

Sharky Forums


Page 3 of 3 FirstFirst 123
Results 31 to 40 of 40

Thread: My new receiver.................

  1. #31
    Not Wurm Isezumi's Avatar
    Join Date
    Dec 2001
    Location
    SAN DIEGO, CA
    Posts
    7,267

    boy I hate to do this

    CE is right in a sense about altered music masters.

    However as I remember it, they only mess around with the super extreme signal ranges, like below 80hz and above 15khz and a slight gain in the vocal frequencies. Mostly this is recently and to help those out that go the $20 bombox route.

    Once you get into stuff like 1ctobar has this point becomes moot. It sounds as though with the seperation that he has it wouldnt even matter in the first place. Everything is so pieced out that he wouldnt even notice a gain or cut in signal. Besides I believe that reciever, as he stated has a feature that pretty much eliminates any problems from cuts and gains.

    EQs are more for Personal hearing prefrence rather then objective reconstruction. Individual results vary greatly.

  2. #32
    Reef Shark Flama22's Avatar
    Join Date
    Jun 2002
    Location
    Nova Scotia, Canada
    Posts
    303
    In my experience EQ's are never really a bad thing unless they are set up wrong. I don't have an EQ for my surround sound system but thats mainly because I don't want to have to pay for one but I'm sure if someone just gave me a decent one for free with some time tweaking it I could make my system sound slightly better to me. There's so many factors that make audio sound good or not that I wouldn't worry about "true sound" everyones systems and speakers are different not to mention ears and whether they have hearing loss at certian frequencies that people, in my opinion, should go for what they find sounds best and an EQ helps that.

    I have my dad's old NAD 7020 reciever hooked up to my computer with a set of old Mission 700's that I rebuilt with new raw speakers and I use the Winamp EQ to help give my somewhat not "true sounding" speakers better sound in my opinion

    CPU: AMD64 2800+ Clawhammer @(240x9) ~ 2.2GHz
    HSF: Zalman 7000A-Cu w/ AS5
    MoBo: MSI K8N Neo Platinum Edition
    RAM: OCZ PC3200 1Gb (2x512Mb) 2.5-3-3-6
    Video: ATI Radeon 9800Pro w/ 17" Sony G220
    Sound: Creative Audigy OEM w/ NAD 7020 and Mission 700's
    HD: Western Digital 160GB 7200RPM 8MB Cache
    CDRW: LiteOn 40x12x48x
    DVD: Pioneer 16x
    Disk: Iomega Zip 100MB
    Case: Chieftec Matrix MX (Green/Silver)

  3. #33
    Mako Shark blppt's Avatar
    Join Date
    Sep 2000
    Location
    Albany,NY,USA
    Posts
    4,061
    NAD rules!

    I wish i could afford one of their integrated amps in a new box. :-(
    ------
    Pat D.

    Athlon 1800+ @1.67ghz (2000+), Vantec CCD-6027D cooler, Soyo Dragon Ultra Black Edition KT400, 512MB Mushkin and 512MB Crucial PC2100 DDR RAM, SBLive Value, Albatron Ti4200 128MB @ 275/550 using 42.86, Logitech Z-560 with switch, KDS RAD-5c LCD(possibly soon replaced by 19" CRT) WinXP Professional SP1, Antec 300W Smartpower, Western Digital WD400BB, Lite-On 24x Burner.

  4. #34
    RIP SiS :( CrawlingEye's Avatar
    Join Date
    Dec 2001
    Location
    Easton, Pa, USA
    Posts
    7,441
    So, back to the topic... how is the receiver?
    So far I've concluded nothing but that it looks nice.
    -mark

    OC Crusader
    Sigma Dir CrawlingEye of the Cooler's Guild
    SharkyExtreme.com 3D Mark Team


    Samsung SM348
    Asus P4S533
    Pentium 4 2.26b
    Samsung pc2700 512MB
    Seagate Barracuda IV 40gig 7200RPM
    ATi Radeon 9700 Pro
    Audigy 2
    Leadtek WinFast TV 2000 XP
    Antec pp412x
    Cambridge Megaworks THX 550
    Sennheiser HD212 Pro
    Sennheiser mx300
    Ultrasone HFI 650 Trackmaster
    Rio Karma


    3D Mark 2001SE Compare: 14707
    3D Mark 2003 Compare: 4550

  5. #35
    Hammerhead Shark pbirkett's Avatar
    Join Date
    Apr 2001
    Location
    Newcastle Upon Tyne, UK
    Posts
    1,467
    OK, a little late to this thread, as I've been very busy lately, setting up new machine's and whatnot.

    Firstly 1ctabor, congrats on the purchase. I'm not farmiliar with Denon surround amps, whats its vital specs? and what speakers u using with it? Whatever the case, if you are planning to hookup to your PC, then you will likely get a far better sound than most multimedia systems out there.

    On the EQ debate, I used to be dead against using an EQ of any kind, but that was more to do with brainwashing by audiophiles that got me into this way of thinking. However, I have come to appreciate the difference an EQ can make to the sound of a system. No system is perfect, and an EQ can help with the deficincies that a given system might have. For example, I know my amplifier is known to had slightly recessed mids, and a slightly reined in treble at the extreme end. So I boost the mids, and the highest treble, and the end result is much more pleasing to my ears.

    Then, as crawling stated before, most recording are not "audiophile" quality recordings. It will be obvious when you listen which recordings are audiophile recordings, because you can turn the EQ off, and it sounds right. However, these will not help you if you dont have tonally perfect equipment either, and I dont. Most budget level equipment will not sound tonally perfect.

    So I agree with CE and others who advocated an EQ - if setup correctly, they will add lots to the enjoyment of your system, particularly if like me, the majority of your tunes are in mp3 format.
    Regards, Paul

    AMD Athlon XP2600+, Thermalright SLK-800, YS-Tech Silent Fans, Lian Li PC60 USB, Corsair XMS2700 1.25 Gb RAM, PNY Geforce 6800 GT, E-MU 0404, NEC ND-3500A DVD Burner, LG 48x CDRW, Western Digital 120Gb HD, Iiyama Vision Master Pro 510, Rotel RA-01 amp, Rega Ela speakers, Beyer DT531 headphones

  6. #36
    Mako Shark blppt's Avatar
    Join Date
    Sep 2000
    Location
    Albany,NY,USA
    Posts
    4,061
    "Most budget level equipment will not sound tonally perfect."

    In defense of 1ctabor's new receiver, the 4802 goes for over a grand, easily. ;-)
    ------
    Pat D.

    Athlon 1800+ @1.67ghz (2000+), Vantec CCD-6027D cooler, Soyo Dragon Ultra Black Edition KT400, 512MB Mushkin and 512MB Crucial PC2100 DDR RAM, SBLive Value, Albatron Ti4200 128MB @ 275/550 using 42.86, Logitech Z-560 with switch, KDS RAD-5c LCD(possibly soon replaced by 19" CRT) WinXP Professional SP1, Antec 300W Smartpower, Western Digital WD400BB, Lite-On 24x Burner.

  7. #37
    RIP SiS :( CrawlingEye's Avatar
    Join Date
    Dec 2001
    Location
    Easton, Pa, USA
    Posts
    7,441
    Originally posted by blppt
    "Most budget level equipment will not sound tonally perfect."

    In defense of 1ctabor's new receiver, the 4802 goes for over a grand, easily. ;-)

    ...but the point was that they mix things to sound good on budget level stereos, not 1k receivers (they add color to the sound to help common deficiencies).
    -mark

    OC Crusader
    Sigma Dir CrawlingEye of the Cooler's Guild
    SharkyExtreme.com 3D Mark Team


    Samsung SM348
    Asus P4S533
    Pentium 4 2.26b
    Samsung pc2700 512MB
    Seagate Barracuda IV 40gig 7200RPM
    ATi Radeon 9700 Pro
    Audigy 2
    Leadtek WinFast TV 2000 XP
    Antec pp412x
    Cambridge Megaworks THX 550
    Sennheiser HD212 Pro
    Sennheiser mx300
    Ultrasone HFI 650 Trackmaster
    Rio Karma


    3D Mark 2001SE Compare: 14707
    3D Mark 2003 Compare: 4550

  8. #38
    Hammerhead Shark 1ctabor's Avatar
    Join Date
    Feb 2001
    Location
    Illinois
    Posts
    1,866
    Originally posted by blppt
    "Most budget level equipment will not sound tonally perfect."

    In defense of 1ctabor's new receiver, the 4802 goes for over a grand, easily. ;-)
    actually if you buy from a certified vendor it sells for $2500

  9. #39
    Goldfish
    Join Date
    Nov 2001
    Location
    Cincinnati, Ohio
    Posts
    72
    1ctabor,

    Congrats! I too bought a Denon 4802 (a couple of months ago) and love it although I'm still experimenting with all of its features. One thing that it really nice about the unit is the On-Screen Display (OSD) feature for setting up the unit and making adjustments.

    I received a lot of helpful information on the Denon 4802 at the following website:

    http://www.hometheaterforum.com

    Enjoy!


    P.S. If you're like me, definitely plan on setting aside a few hours to set up and tweak it. The Denon 4802 has a ton of "bells and whistles".

  10. #40
    Hammerhead Shark 1ctabor's Avatar
    Join Date
    Feb 2001
    Location
    Illinois
    Posts
    1,866
    Originally posted by Bannon
    1ctabor,

    Congrats! I too bought a Denon 4802 (a couple of months ago) and love it although I'm still experimenting with all of its features. One thing that it really nice about the unit is the On-Screen Display (OSD) feature for setting up the unit and making adjustments.

    I received a lot of helpful information on the Denon 4802 at the following website:

    http://www.hometheaterforum.com

    Enjoy!


    P.S. If you're like me, definitely plan on setting aside a few hours to set up and tweak it. The Denon 4802 has a ton of "bells and whistles".
    Yes, still working on it actually. As for cd music its incredible. It completely transformed my polks from what my sony used to play through them. Already worth it. Haven't had the chance to experiment with dvd's yet.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •