As some of you know, I have been searching for a way to stretch my overclocking with my 2100 b (0303) while keeping my fsb at 166 to keep my agp/pci in spec. Using the chart found HERE at ocinside, I cut my 2nd L3 bridge. (I also removed the painted bridge for the last L3 bridge that I had previously made to access the lower multipliers). When I cranked 'er up, I had successfully obtained a 14x multiplier!

Right now I have the vcore at 1.75v, and I am running prime95 to check stability. If everything checks out, I may try reducing it a bit.

2320 mhz @ 166 fsb
Idle temp - 34c
Load temp - 39c

So far, I'm pretty darn happy with the results. I may experiment and push the fsb up a bit from here too.

I've asked this question before, but never heard back... how far is everyone willing to push their agp/pci out of spec? What is considered safe limits?

I'll post back with further results.