I'm using an Epox 8RDA+ motherboard.

This is really bugging me. My front USB ports don't seem to work when i connect my Sony F717, but if I plug the camera in the rear ports, everything works fine.

I unplugged my USB mouse from the rear and put it in the front USB ports and that seemed to work.

I redid the wiring like 4-5 times to make sure that wasn't the problem.

I unplugged the front USB wires from the mobo and plugged in the rear USB bracket that came with the mobo, which I wasn't using. The camera worked when i did this. It seems strange to me because I plugged this rear bracket into where the front USB wires are suppose to go.

I'm so confused. I lost the CD for the 8rda+ so I just downloaded everything off the internet. When i go into systems under control panel, all the hardware looks good, no driver conflicts, until of course I plug in my F717 into the front USB ports of the case. It says unknown device.

I installed the unified drivers from their site. Is there USB drivers I'm missing?

I also lost the cd to my camera (both cd's were placed in one cd case ). I couldn't find the drivers off Sony's site, but this camera didn't require drivers on my other computers.

What do i do?