Hi all,

Hoping some experienced users can help me out. After a 4hr stint im a bit frustrated.

Before ive stripped laptops down and rebuilt without a prob. This time the usb connection at the back was so loose it was wobbling off the mobo. Stripped it all down to bare pieces and removed the mobo. When i removed the heatsink the cpu came off attached. One or two pins were out by the fraction of a millimetre as well which i straightened with my fingernail and reseated the cpu with thin amount of paste, etc etc.

Used hot glue since its non conductive but i put the hot glue on cardboard until it cooled down and then put it on the mobo between the power connector and usb without knocking anything.

All the ports were secure so i rebuilt making sure connectors were all tight and snug. After screwing it all back together the charge light wouldnt acknowledge and it wouldnt switch on. Kept trying the power button multiple times but nothing. Suddenly it kicked to life although nothing being displayed for a couple seconds. Since then nothing at all

Help !?!