TONS of stuff, Added DVD, IBM 34GXP, Taisol heatsink, ALL PRICES LOWERED

HEATSINK TAISOL 742002 (the big one) for Athlon 1400, low profile quiet fan, triple hole clip, 80 mm wide - may not fit on all motherboards, see http://www.taisol.com/products/pdf/cgk742002.pdf review http://www.anandtech.com/showdoc.html?i=1361&p=15 $22
....
All non new CDROM's and CDRW's are tested good
.
DVD DRIVE HITACHI/Compaq GD-2500 4X dvd, 24X read, Hitachi top quality, smooth and quiet, Compaq beige face, region free with a bios upgrade, $34
.
DVD TOSHIBA 8X/40X, SD-M1302, HP pull, charcoal gray face, 80/95 ms access, region free firmware is available, great CloneCD reader, excellent with CDR or scratched CD's, $43
.
DVD PIONEER 16X/40X, DVD-115VAF, tray type, manf. Aug. 2000, Compaq gray color, fast, quiet and smooth, 85ms access, 1.5second spin up $54
.
DVD PIONEER 16X/40X, DVD-115ME, tray type, manf. June 2000, White faceplate, see above, patched region free firmware is available, $56
.
DVD PIONEER 6X/32X, DVD113MC, tray type, Black faceplate, white tray end trim piece, 12x-22x DAE, fast and smooth, patched region free firmware is available, $35
.
DVD AFREEY 8X/32X, DD-4008E, 90/100 ms access, appears new, 512k buffer, has jumper for region free, see http://www.afreey.com/product.html $37
.
CDRW PLEXTOR IDE 8X4X32, no problems, with Nero, $94
.
DECODERS-DVD play DVDs on a P133!
...DVD DECODER Creative Dxr3, same as Hollywood plus, see http://www.creativelabs.com/support/...sp?centric=111 , new, no cables, $20 pending
.
DVD Decoder Creative Dxr2, see above link, no cables, used, $15
....
VIDEO Aopen P3000 TNT Vanta, 16 meg, 4x AGP, NEW retail box, includes win 9x, NT, 2000, Linux drivers, one left, $24
.
Diamond Speedstar A200 8m AGP, S3 Savage4 Pro chipset, 300mhz Ramdac, $21
.
AOpen PA70 TV OUT AGP, 8m, S VHS and comp TV out for NTSC/PAL/HDTV, DVD compatible, simultaneous monitor and TV out, 250 mhz Ramdac, new, bare, see http://english.aopen.com.tw/products/vga/pa70d.htm $25
.
STB Velocity 128 TV OUT, AGP, 4m, S VHS and comp TV out, new, bare, $23
.
STB Velocity 128, AGP, 4m, with driver CD, $19
.
ATI Rage Pro Turbo, 4m upgradable, 2x AGP, excellent support of software DVD playback, new, bare, have driver and video player software, $19
.
ATI Rage Pro Turbo TV OUT, Xpert@play, 8 meg, 2x AGP, excellent support of software DVD playback, new, bare, have driver and video player software, has Impac TV2 TV out chip, Comp and S video out, have drivers and video software, $35
.
Diamond FireGL 1000 Pro AGP, Permedia 2 chipset, suitable for business PC's, excellent in NT, new, bare, $18
.
Matrox Millenium II, AGP, 4meg, excellent 2D speed, color, and sharpness, faster 250 mhz model, new(?) with driver CD, very good for business use, $20
....
All non sealed drives are scandisk no errors.
.
HARD DRIVE 34 GIG IBM DESKSTAR 34GXP IDE, 7200 rpm, 2 meg buffer, 8.5 ms seek, model DPTA-373420, cost $399 new, see http://www.storage.ibm.com/hdd/suppo.../dpta34_ps.pdf $105
.
HARD DRIVES, NEW Western Digital Sealed retail box!:
...45Gig, 5400 rpm, ATA66, 9.5ms, 2mb, FAST 15 gig per platter, 3 yr warranty, http://www.storagereview.com/welcome...WD450AA_1.html , has mounting brackets and ATA66 cable, $114
.
WD 8.4 Gig, 5400 rpm, ATA66, 9.5 ms seek, See http://www.westerndigital.com/produc...s/ac28400.html still in warranty, $56
.
HARD DRIVES, Maxtor:
...3.2 GIG, ATA33, 5400rpm, 9.0ms, back from warranty, sealed in bag, warranty thru 3/02, $34
.
8.45 GIG, ATA33, 5400rpm, 9.0ms, back from warranty, sealed in bag, warranty thru 1/03, $57
.
2.1 Gig, used very little, $23 (have 3)
.
HARD DRIVES, QUANTUM
...1.08 gig Fireball, PIO 4, 5400 rpm, used no bad sectors, fast little drive, $15
.
HARD DRIVE, SEAGATE
...1.08 GIG SCSI sealed-back from warranty, model ST51080N, fast SCSI2 (50 pin), 5400 RPM, 1/2 height, $17
....
SQUARED CABLES - Factory Made DELL - ATA33 & FDD
IDE 15", squared, single device, $4
IDE 17", 2 device, first plug 13", last section is not squared, $6
IDE 17", 2 device, first plug 12.5", last section is not squared, $6
IDE 17", 2 device, first plug 11", last section is not squared, $6
IDE 17", 2 device, first plug 11", $7
FDD 12", single device, $5
.
PREMIUM ROUNDED CABLES - NEW AST Server parts, the cables run thru a 3/8" vinyl sheath, very professional and neat, ATA33 & FDD
IDE 18.5",2 device, first plug at 12.5", lt. gray, $10
IDE 18", 2 device, first plug at 12", black with tapered shrink fit cover where cable flares to the plugs, $11
FDD Long 22" lt. gray single device, $10
.
Squared Cable IDE LONG 30" 2 device, first plug at 15", hand made, $10
....
CDROM AOPEN CD940E/AKU PRO (Hi Val) 40X, NEW sealed in retail box, listed on CloneCD's site as a fully compatible, I'm using one and it's very quiet and smooth, $34
.
CDROM 40X HI VAL, NEW, have 1, I tested it with CD Speed, 85ms access, data 18 - 41x, perfect DAE with no errors, reads burned CDs at 20x, seemed smooth, $28
.
CDROM TOSHIBA 24X, XM-6102B, IDE, fast 85ms access, smooth Toshiba quality, good for CloneCD, reads CDR's well, off white faceplate, $19
.
CDROM TOSHIBA 12X, XM-5702B, IDE, quality older drive, reads CDR's well, off white, $14
.
SCSI CDROM Toshiba XM-5401B-S, 50 pin scsi, 4X, $12
....
MODEMS
HARDWARE ISA Modem Aopen FM56ITU, full duplex voice, V90/K56flex Rockwell chipset, appears almost identical to the USR, see http://english.aopen.com.tw/products/modem/fm56itu1.htm , $34
.
Modem PCI Aopen, full duplex voice, V90/K56flex Coxenant/Rockwell dual chipset, see: http://english.aopen.com.tw/products/modem/fm56p.htm , new, no box, $19
.
Modem 56K USR ISA HARDWARE with jumpers, model 0584(model 00568703), have win9x, 2000 driver/inf disk,see: http://www.usrobotics.com/products/h...?sku=005687-03 $44
.
Modem 56K USR Sportster ISA Hardware voice with jumpers model 0484(66174900) $38
.
MODEM, SmartLink NEW 56K internal PCI VOICE fax modem, ESS chipset, have 1. $17
.
MODEM, Best Data NEW 56k internal PCI fax modem model A56FW-PCI, $14
.
MODEM USB NEW in box, Best Data, Rockwell/Coxenant chipset, V90, V80, K56Flex, 5 yr. warranty, swap between computers without rebooting, $35
....
MOTHERBOARDS
SLOT 1
The AX6BC series motherboards listed are similar to the famous AX6BC PRO GOLD, possibly the best most stable BX overclocker produced including it's Jumperless design.
.
...AOPEN AX6BC EZ Bios adjustable CPU core voltage and 16 FSB's from 66 to 153mhz, with the latest bios will support PII, PIII, Celeron 1&2, and Coppremines, see http://english.aopen.com/products/mb/Slot1Tab.htm new retail box, one left, $64
.
...AOPEN AX6BC, BX chipset, with the latest bios supports PII, PIII, Celeron 1&2, and Coppremines, Bios adjustable FSB from 66 to 153mhz in 15 steps, see http://english.aopen.com/products/mb/Slot1Tab.htm , bare board, one left, $54
.
...AOPEN AX6B Plus SCSI, BX chipset, onboard Adaptec 7880P UW SCSI, with the latest bios will support PII, PIII, Celeron 1&2, and Coppremines, 50 pin and 68 pin onboard SCSI connectors, Bios adjustable FSB from 66 to 133mhz in 8 steps, see http://english.aopen.com/products/mb/Slot1Tab.htm ,Overclock a PIII to 133 fsb, add a fast SCSI drive and Scream, new with a 68 pin cable, one left, $81 Also suitable for high end workstations.
.
...Asus P2L97 DS, DUAL Processor SCSI, LX chipset, Adaptec 7880 onboard UW SCSI (40 mb/sec), Supports PII 233-333 (and CELERONS with the beta bios), 66,68,75,83,100 bus speed settings, bare board, has optional LM78 monitor chip, tested good, have 1 $58
.
SOCKET 370
...AOPEN MX3ZA Fast Intel ZX (fast economy BX) chipset, Micro ATX, separate onboard ATI Rage Pro Turbo AGP video chip, sound, 15 bios adjustable bus speed combinations from 66-150, see: http://english.aopen.com.tw/products/mb/mx3za.htm ,I bench tested it with a FCPGA Celeron II 566, should support PIII Coppermines too, bare board, one left, $53
.
...QDI Winnex1 Intel 810 chipset, ata66, integrated audio and video, nice small microATX, 66-100mhz fsb settings, celeron board, bare, see http://www.qdi.ca/qdi/products/810w1.htm $39.
.
NOTE:Some of the above boards may need a bios upgrade to support the latest processors.
Fans
PAPST RL90 narrow centrifugal/squirrel cage fan, 120x120x37mm, 80mm dia. air inlet, rectangular 25x50mm outlet, 12v, 1 amp, rated 6-15volts,see http://www.papstplc.com/downloads/DC/rl90.pdf NEW Dell server part, is mounted in a steel box with control circuitry that can be easily removed, blows air at a 90 degree angle to air intake, puts out a narrow HIGH velocity column of air you can feel 8 feet away, perfect for ducting or just aim it at your heatsinks, have several, $9

....

WANTED Faceplate for Sony CDROM/CDRW and Pioneer tray DVD/CDROM
WANTED CompUSA (Clevo) Amerinotes Laptop power supply;
Need P.S. for CompUSA Celeron laptop, has tiny rectangular 3 pin plug about 1/8 x 1/4 inch in size.
Wanted Heatsink clips for a P4

Shipping extra at cost.
Will ship outside the US at your risk.
Can include a copy of current software with the CDRW.
Used HDD all scandisk OK
Prefer response by email [email protected]
I may not get back to you till after work.
Reviews/references, http://heatware.elitehardware.com/ and http://www.beerology.com/ars/ username ebaker.