Need Help Bad Please....

[pwain]

I have a A7M266, never have figured out how to get the LED connectors from Lan Li to work exactly right, but im not to worried about it, ohh and a quick question, my Lan Li PC70 has usb ports on the front and it has about 5 connectors per two ports but i dont know how to conect it to the mobo since it has its own little card and cable.

------------------
AMD 1600 XP
Gainward Geforce 3
256 DDR Ram
ASUS A7M266
3DMarks Score :6757

-Dont blame me for bad spelling, blame public education-

[blt]

The PSU needs to be connected to a board. If not, I don't think you will get anything.
Connect it to the board and the fan should work, if the position of that "O/-" switch is correct.

[muisejt]

To get power out of a ATX power supply you need to have it connected to the motherboard and then use the power switch on the case i.e. the button on the front of the case you normally use to turn the computer on, the cable from the switch must be plugged into the motherboard for this to work. Or you could take a paper clip and short the green wire on the power supply connector you plug into the motherboard to one of the black wires.

------------------
If your sig is longer than your post then type more.

My Site

[CAMS]

Originally posted by DAoC:
Ok a question...

Im using an enermax 330w pwr supply. On the back there is a "O/-" switch for power. Now, if i plug a case fan into one of the power cables coming out of power supply, plug in suppy to wall, and hit the switch over to "-", should the fan come on? Im just thinking maybe the power supply is messed up.

I submitted an RMA request over at newegg.com and am going to try and replace the mobo with a new one. See if that helps.

No. You have to short several pins on the 20 pin connector for that to work. Look around the web for details.