How d heck do u perform a LOW LEVEL FORMATTING on your hard disk?

Sharky Forums


Results 1 to 5 of 5

Thread: How d heck do u perform a LOW LEVEL FORMATTING on your hard disk?

  1. #1
    Catfish
    Join Date
    Dec 2001
    Location
    UK
    Posts
    156

    How d heck do u perform a LOW LEVEL FORMATTING on your hard disk?

    how can i perform a low level formating on my hard disk. i wana perform this on an old system 233mhs, 96RAM, etc. the system has no OS installed at current but i do have access to DOS thru the start up disk. i wana know how can i performa low level format to my hard disk. what are the parameters if any???
    * Mesh ATX MIDI Tower Case + 300W PSU
    * Athlon DDR 333MHZ Motherboard (Onboard sound)
    * AMD Athlon XP 2200+ CPU (266MHZ)
    * 512MB (2 x 256MB) PC2100 DDR MEMORY (266MHZ)
    * 120GB Ultra Fast (7200rpm) HD with 2mb Buffer
    * 1.44 MB Floppy Disk Drive
    * Teac 40 x 12 x 48 IDE CD-RW
    * 128 MB NVIDIA GFORCE4 TI 4200 + TV out & DVI
    * 19" Hansol Digital Monitor 0.26mm
    * Logitech Navigator Cordless Keyboard & Mouse
    * 16x LG DVD ROM Drive
    * Creative Sound Blaster AUdigy W/SB1394 (Firewire)
    * 56kbs Modem
    * Creavite Labs Inspire 5300 Five Point Surrounds
    * Lexmark X83 Printer (All in one)

  2. #2
    Hammerhead Shark Samjham's Avatar
    Join Date
    Jan 2001
    Location
    over there
    Posts
    1,641

    Re: How d heck do u perform a LOW LEVEL FORMATTING on your hard disk?

    Originally posted by Girl_needs_help
    how can i perform a low level formating on my hard disk. i wana perform this on an old system 233mhs, 96RAM, etc. the system has no OS installed at current but i do have access to DOS thru the start up disk. i wana know how can i performa low level format to my hard disk. what are the parameters if any???
    What kind of HDD is it? On my IBM HDD I use IBM Drive Fitness that is on a floppy and it can low level format. There's probably some generic utilities out there that will do this for any HDD. Try looking at www.downloads.com

  3. #3
    Hammerhead Shark
    Join Date
    Aug 2001
    Location
    cleveland ohio usa
    Posts
    1,016
    most hard drive manufacturers have a program to partition and format the drive.
    find out what type of hard drive it is,visit the manufacturers website,download the program and it should create a boot floppy for you.
    Last edited by mtpockets; 09-29-2002 at 07:03 PM.
    anandtech sucks,this is my opinion,my signiture has been changed because I was asked to,please don't visit anandtech!!

  4. #4
    Catfish
    Join Date
    Dec 2001
    Location
    UK
    Posts
    156
    i just took it out and it read SEGATE On it. so i went to seagates's site and downloaded a program form this address http://www.seagate.com/support/disc/...s/discwiz.html
    the program is called DiscWizard Starter Edition. when i opened the program after downlaoding it, it aksed me to put an empty flopy inside and than copied a few files on d floppy. 2morow i will insert that floppy in my new system and see if it helps any. plz go that site and tel me what u think, iz that the right program i downlaoded.
    * Mesh ATX MIDI Tower Case + 300W PSU
    * Athlon DDR 333MHZ Motherboard (Onboard sound)
    * AMD Athlon XP 2200+ CPU (266MHZ)
    * 512MB (2 x 256MB) PC2100 DDR MEMORY (266MHZ)
    * 120GB Ultra Fast (7200rpm) HD with 2mb Buffer
    * 1.44 MB Floppy Disk Drive
    * Teac 40 x 12 x 48 IDE CD-RW
    * 128 MB NVIDIA GFORCE4 TI 4200 + TV out & DVI
    * 19" Hansol Digital Monitor 0.26mm
    * Logitech Navigator Cordless Keyboard & Mouse
    * 16x LG DVD ROM Drive
    * Creative Sound Blaster AUdigy W/SB1394 (Firewire)
    * 56kbs Modem
    * Creavite Labs Inspire 5300 Five Point Surrounds
    * Lexmark X83 Printer (All in one)

  5. #5
    Tiger Shark
    Join Date
    Feb 2002
    Posts
    626
    Before doing a low level format you might want to take a look at this site.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •