Engineering Help Appreciated for WC setup

Sharky Forums


Results 1 to 15 of 56

Thread: Engineering Help Appreciated for WC setup

Threaded View

  1. 11-18-2002, 06:06 PM #1
    zackbass
    zackbass is offline
    Hammerhead Shark zackbass's Avatar
    Join Date
    Aug 2001
    Location
    MIT, Cambridge MA
    Posts
    1,692

    Engineering Help Appreciated for WC setup (Now update log)

    I finally started the new case I've been talking about for so long. I got the metal on Wednesday, and since then have practiced welding, and started on the frame.

    The metal I'm using is 304 stainless square tube, .75"x.75", ~.012 thick. The idea is to use the frame as a resivor and dirstibution header. So far I have welded two 22" square side sections separately.

    Edit: I assume you've all seen that big image enough by now.
    http://members.lycos.co.uk/zackbass1/Frame.jpg

    The bottom sections are placed in the picture to show how they will be connected, but have not been welded.

    The question I pose is, what would be the best way to make use of the frame as part of the cooling system? All suggestions (even if they don't sound doable) are appreciated.
    Last edited by zackbass; 04-23-2003 at 05:39 PM.
    P4 2.4C @ 3.44Ghz , 285 FSB -- Asus P4C800-E -- 512 Mb Corsair PC4000 -- Radeon 9800np 445.5/398.3 Vmodded-- 2xRaptors in RAID 0 -- Watercooled CPU, GPU and Northbridge -- Handcrafted Case

    ... And Folding Like No Tomorrow
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules