Help using other signals through VGA Monitor?

Sharky Forums


Results 1 to 9 of 9

Thread: Help using other signals through VGA Monitor?

  1. #1
    Tiger Shark Mark's Avatar
    Join Date
    Sep 2000
    Location
    Wentzville, MO
    Posts
    828

    Smile Help using other signals through VGA Monitor?

    I’m looking at hooking in all my Console systems to my 21” Sony Trinitron monitor. Reason? Wife is making me move the 36” HDTV upstairs in our family room and my systems don’t get to follow! (Can you hear the whips) =P

    Anyhow I would like to run everything from my monitor so I never have to leave my area! I forbid myself from entering her Martha Stewart inspired realm.

    The systems I would like to hook up are,

    Primarily

    PS2
    XBOX
    GAMECUBE

    And not so exclusively but I still would like a way to send in the signals,

    DreamCast
    3DO
    N64
    SNES
    NES
    GENESIS
    SATURN
    ATARI 2600
    Intellivision

    I need inputs for Component(2), Composite(6), Svideo(2), and Coax(2). Also I need to find a way to hook in all the audio to the PC speakers (2.1 Klipsh)? The older systems running through COAX will be the hardest task!

    I am building a display case around my PC to house my collection and I would like to setup some various switches (selectors) to switch between one signal to the next?

    I have seen the Key Digital Systems Progressive Scan module but it won’t display NON-progressive scan games?

    Has anyone attempted a setup of this scale? Or has anyone seen some hardware that will allow this to be attempted?

    If I push the cost up in the 1500-2000 range I might as well buy another HDTV. But I might do whatever it takes to make this work just to have it all setup in one location.


    Thanks for any help!

    Mark

  2. #2
    Hammerhead Shark Racer^'s Avatar
    Join Date
    Feb 2001
    Posts
    1,758
    Look at http://www.avguide.com/receivers/aud..._receivers.jsp

    The closest fit at the lowest price that I could find is the JVC RX-9010VBK (as low as $330 at eCost.com) which would support almost all the game systems you listed.

    Those old COAX connectors will make a single-solution system difficult to obtain unless you are willing to pay over $3000. I suggest you buy a separate converter for the coax and run them into a more commonly used input. If you get the JVC receiver listed above, a coax-to-Svideo converter would probably be the best solution. Something like this http://www.smarthome.com/851105.html coverter for $90 sounds like it would work well. There are cheaper converters around if you look hard enough.

    All together, that makes it around $500-$600 for the entire setup, not bad in my opinion.
    Last edited by Racer^; 01-17-2003 at 05:13 PM.

  3. #3
    Hammerhead Shark
    Join Date
    Dec 2000
    Posts
    1,579
    Originally posted by Racer^
    Look at http://www.avguide.com/receivers/aud..._receivers.jsp

    The closest fit at the lowest price that I could find is the JVC RX-9010VBK (as low as $330 at eCost.com) which would support almost all the game systems you listed.

    Those old COAX connectors will make a single-solution system difficult to obtain unless you are willing to pay over $3000. I suggest you buy a separate converter for the coax and run them into a more commonly used input. If you get the JVC receiver listed above, a coax-to-Svideo converter would probably be the best solution. Something like this http://www.smarthome.com/851105.html coverter for $90 sounds like it would work well. There are cheaper converters around if you look hard enough.

    All together, that makes it around $500-$600 for the entire setup, not bad in my opinion.
    That still didn't solve his problem as far as how to convert the signal to his monitor.

    What kind of video card do you have? I would probably recommend a Radeon All-in-Wonder. How well would just a tuner card work for this? I'm too lazy to look for a straight conversion from all the component composite to VGA, most likely the video card would be the cheapest solution. Correct me if I'm wrong, but I'm just guessing.

  4. #4
    Tiger Shark bbrennan's Avatar
    Join Date
    Jul 2001
    Location
    Chicago
    Posts
    549
    All you need to use the coax systems is a RF Converter. It will take the RG-59 cable signal and slpit it into Audio/Vidoe signals along a standard RCA connection. An RF Converter can be made to handle from 1 to as many signals as needed. Thay can be found from a base price of around 10-15 dollars. This paired with the JVC RX-9010VBK and a video card to support the input signals you want will be the best soloution.

  5. #5
    Tiger Shark Mark's Avatar
    Join Date
    Sep 2000
    Location
    Wentzville, MO
    Posts
    828
    Racer,

    Thanks for the links and your advice. Yes I was planning on converting the coax over to a more common format!


    lavalva,

    I have a Radeon 9700 Pro but not the all in wonder flavor. I also didnt want to have to run signals through the PC just straight to the monitor.

    And this is the link to the module to enable HD from the Gamecube and Xbox, then shoot it through the Monitor?

    http://www.keydigital.com/search_res...&btnSearch.y=5

    Thanks!

    Mark
    Last edited by Mark; 01-17-2003 at 09:16 PM.

  6. #6
    Hammerhead Shark
    Join Date
    Dec 2000
    Posts
    1,579
    Originally posted by Mark
    Racer,

    Thanks for the links and your advice. Yes I was planning on converting the coax over to a more common format!


    lavalva,

    I have a Radeon 9700 Pro but not the all in wonder flavor. I also didnt want to have to run signals through the PC just straight to the monitor.

    And this is the link to the module to enable HD from the Gamecube and Xbox, then shoot it through the Monitor?

    http://www.keydigital.com/search_res...&btnSearch.y=5

    Thanks!

    Mark
    If you went with the recommended receiver, or any other home theater receiver with a set of component outputs, you would run everything to the receiver, then run video out from the receiver to the conversion box, that would solve everything.

  7. #7
    Mako Shark Lord Vetinari's Avatar
    Join Date
    Jan 2002
    Location
    Worthing Sussex England
    Posts
    3,561
    Just for those non U.S. residents- who is Martha Stewart?- this is the second time I've seen her referenced in these forums.
    Newest comp DFI nf2 ultra xp1500-m @223*10.5 or XP2500-M barton @230*10.5
    new comp- 8RDA+, xp2100 TbredB @202*11, 2*twinmos 3200 (non winbond), 9700 pro, Maxtor 9 plus 80gb &120GB, Hitachi CML174SWB 17" LCD
    Old comp KT7A Axia 1ghz @1.38GHZ,
    GF3 ti200, Compaq 910 19" Monitor

  8. #8
    Tiger Shark Mark's Avatar
    Join Date
    Sep 2000
    Location
    Wentzville, MO
    Posts
    828
    What type of reciever would you reccomend? I havnt seen on with all the video/sound inputs i need... can you send me a link to one you would reccomend?

    Anyhow the letdown of that would be the XBOX and GAMECUBE wont run in High def mode with out that Box from keydigital systems. But I wonder if I can run everything but those two through a reciever and have a vga switch of somesort...




    Martha Stewart is this psycho woman that makes cakes and decorates all crazy.... www.marthastewart.com enjoy! lol


    Mark

  9. #9
    I Love My Mommy Trav2003's Avatar
    Join Date
    Jul 2001
    Location
    Jefferson City, MO
    Posts
    8,871
    Originally posted by Lord Vetinari
    Just for those non U.S. residents- who is Martha Stewart?- this is the second time I've seen her referenced in these forums.
    Yeah, as Mark said she is one of those good 'ol stereotypical cook, bake, clean the house, plant a garden type of women who has her own TV show and cookbook line, and probably every kind of line of houseware available. She's extremely wealthy and she's also been accused of illegal insider trading which has gotten her a bad rap (and made her the butt of jokes
    Main PC: MSI P965 Neo-F | nVidia geForce 7300GT | Intel C2D E6400 | 250GB SATA II WD Hard Drive | SB Audigy 2 Platinum | 8x DVD Burner| 2GB Corsair XMS DDR II 675 | Logitech z680's | Cordless MX Duo | Samsung 191T | (2) 19inch Rosewill 913E

    HTPC: Abit IC7 | ATI Radeon 9800 Pro | Intel P4c 2.8Ghz | 120GB WD SE | Chaintech AV-710| 4x DVD+RW | 1GB RAM | Onkyo 7.1 Speakers | TV Tuner | Rosewill Cordless KB and Mouse | 15 Inch LCD | Panasonic PT-L500U Projector | USB 2.0 Card Reader

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •