|
-
Hammerhead Shark
((((Contest Entries & Rules))))
Welcome to Completely Customs First Contest
I would like to first THANK, cranch and CaTalyST for helping to put together this little contest. I would also like to remind everyone that this is a low-key contest and is being conducted for FUN & the Love of Case Modding. If this contest runs good and folks show alot of interest then I would expect to see more low-key contest. Now with all the hoopla out of the way lets move on to the Rules and Entries.
CONTEST NAME: Best Overall Computer MOD & Rig
RULES:
1-Entries will only be excepted by Registered Members as of 3/20/2003.
2-Personal Mods/Wiring will only be accepted, NO Alienware or VooDoo or Online/Store Bought Rigs.
(If you have a Alienware Rig that you have cut up and or modded then by all means submit it)
3-Photos should be no larger then 800x600. Smaller is Better, if you need help shrinking them down ask someone.
(Entries must have Min. of 2 Photos.(1-Internal, 1 External)
(Email should include brief description of Entry)
4-Contest will run from 3/21/2003-4/11/2003, thats 3 weeks to give everyone time to clean up their RIGS and take PICS.
5-Only 1 Entry per member.
6-Entries will be submitted to cranch at [email protected] and to TAZTG at [email protected] so we can review and decide if entries will be acccepted.
7-Winner will be chosen by members in an open thread after all entries have been submitted. Please Post Your 1 Vote and comments.
The Entries will be posted into this Thread for all to review. On 4/12/2003, I will create a Open Thread and Members can place their
1-vote and comments(try to be tactful).
The winner receive a Custom Avatar and maybe a Custom Title.
Let the Games Begin and remember to Play Nice..
 
-
Hammerhead Shark
OK, Let me start it off with my RIG..
ENTRY 1---TAZTG Frag Box..
Description:
ASUS P4S533, Intel 2.4(533mhz) 512MB Corsair PC2700, Xtasy GeForce 4 Ti 4600, 40GB ATA100 Maxtor, 40GB ATA100 Western Digital, Acer 16xDVD
Yamaha LightSpeed(3) 24x 10x 40x, SB Live Platinum 5.1,
ANTEC TruePower 550W
Case Mods Include: Baybus, Swiftech MCX-462 with 80mm Tornado
4-80mm Antec Blue LED (2-Front Intake, 2-Rear Exhaust)
1-80mm Tornado Intake (Bottom), 1-120mm Exhaust (Top), Rounded Cables
2-Blue Cold Cathode Lights, 1-Blue LaserBay, 3-Blue Lazer LED's
3-Laser Cut Fan Grills, Black Sleeves on Power Supply Strands
Entire Case:
Window MOD:
Internal Wiring:
-
Hammerhead Shark
-
Hammerhead Shark
-
Hammerhead Shark
-
Hammerhead Shark
-
Lurking all the time
ENTRY #6 GLScooby
Specs:
_
XP 2400+ w/ Swiftech MCX462+ (lapped), Abit KD7, 512MB Kingston PC3200, MSI G3 Ti200 128MB, WD 120GB SE, SB Live, Pioneer 104S DVD, Cendyne 48/24/48_CDRW, Antec KS282 case w/PP303X 300W psu, 4 Antec LED Fans, CCFL.
_
I was really shootin' for clean here. I painted the inside of the case gold, hid the power button & LED leads behind the MB tray, turned the HDD around, stealthed the CDRW, added black wire loom, covered the area behind the PSU with a piece of aluminum (taped in with muffler tape), added a DIY blowhole, cut out the stamped grill in the back and on the intake for better airflow, and the window is 100% DIY - cut with Dremel - 3/16" acrylic - screws are countersunk to be flush with outside of the case. Thanks to everyone at SF. YOU helped make this a reality.
-
Hammerhead Shark
-
Hammerhead Shark
-
Hammerhead Shark
-
Hammerhead Shark
-
Lurking all the time
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
)
)
. I put an old NB cooler on the Vodoo and took the extra heatsink that came with the Vantec and slapped it on the back of the card.
