|
-
Hammerhead Shark
Finally!!! 200FSB w/KT400!
Here's what it took...
Athlon Xp2400 @ 12.5 X 200 (2500mhz )
1.95vcore
80mm A0C smart fan on all copper
55C under full load
40mm cheap sucker n.b. cooler
Shuttle Ak37GTR Raid disabled (couldn't take 40mhz bus)
1.8v agp
2.8v chipset
512meg Sammy PC3200 @200mhz
2.8vdimm
2-3-2-2-2 timings
Mad Dog GF4 8X Mx440 @80mhz
How do I post snapshots of my benchies?
2897meg/sec mem bandwidth (sisoft 2003)
8990mips (sisoft)
9250 3dmarks 2001
Not quite as lofty as my 8RDA, but new respect for VIA!
Last edited by drs1771; 04-20-2003 at 10:58 PM.
-
Tiger Shark
Hit Prt scr on the top right of the keyboard next to scroll lock. Then it will print everything on the screen. Next go to some prog like MS paint and copy it all and save as JPG. That will get you going, but you are gonna need a host to show them here. Good job though, KT400 @ 200FSB is a good OC.
AIUHB (0302) @ 10x225
A1 8RDA+ Top fsb:231
9700np 365/294 w/Zalman ZM80A-HP
HyperX 512 pc3500 2-2-5-2
WD SE 80gig
3 UV fans, light, cables, & ferrari mod
3DMark2001SE 225FSB = 16402
-
i've got a KT400 and one of the new 1700's with 1.5vcore is in the mail for me... if this processor clocks as well as i'm hoping, i think i'm going to have to buy a new mobo
My Stuff (really outdated.. try HERE for now)
Hardware: Abit KD7, XP 1700+ Tbred @ 146x15 @ 1.80Vcore, 1x512 + 2x256 Kingston DDR, ATI AIW 9700 PRO, Creative Soundblaster 5.1 Live!, 550watt Enermax PSU
160GB Samsung hard drive
Watercooling - Maze3, Eheim 1250, modified Super Cube radiator and heater core
-
Hammerhead Shark
Originally posted by Philip
Hit Prt scr on the top right of the keyboard next to scroll lock. Then it will print everything on the screen. Next go to some prog like MS paint and copy it all and save as JPG. That will get you going, but you are gonna need a host to show them here. Good job though, KT400 @ 200FSB is a good OC.
O.K... I can create jpegs, but I need a host to upload them... Any recommendations?
drs1771
Main rig: i7-2600K, Gigabyte GA-Z68XP-UD3-iSSD, 16GB Kingston Hyper X 1333, 320GB Seagate Sata 3.0 X2 (Raid 0), Intel 40GB SSD Cached (Intel Rapid Storage), ATi Radeon HD5700.
"It's not the size of your sig that matters, its the size of your heatpipe..."
-
Hammerhead Shark
Originally posted by drs1771
O.K... I can create jpegs, but I need a host to upload them... Any recommendations?
Sorry, just realized that was me that posted before. Best host I have found, and what I use now, is www.fox302.com Free hosting, and at any size. If you need anything else, feel free to PM me.
-
My Stuff (really outdated.. try HERE for now)
Hardware: Abit KD7, XP 1700+ Tbred @ 146x15 @ 1.80Vcore, 1x512 + 2x256 Kingston DDR, ATI AIW 9700 PRO, Creative Soundblaster 5.1 Live!, 550watt Enermax PSU
160GB Samsung hard drive
Watercooling - Maze3, Eheim 1250, modified Super Cube radiator and heater core
-
Reef Shark
This board has a 200 mhz jumpeer setting where the pci and agp runs at default....
Athlon XP-M 2400 @ 2.4ghz 1.65v
NF7-S
9800pro @ 450/425
512mb Old school 2700 rebranded BH-5
"Idolatry is worse than carnage."
The koran, 2: 190
-
Hammerhead Shark
Hmm, might wanna email the webmaster or something. That is weird, I haven't had any problems with them. They are good in my book
-
my account mysteriously re-appeared sometime while i was at work today...
*shrug*
go figure
My Stuff (really outdated.. try HERE for now)
Hardware: Abit KD7, XP 1700+ Tbred @ 146x15 @ 1.80Vcore, 1x512 + 2x256 Kingston DDR, ATI AIW 9700 PRO, Creative Soundblaster 5.1 Live!, 550watt Enermax PSU
160GB Samsung hard drive
Watercooling - Maze3, Eheim 1250, modified Super Cube radiator and heater core
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|