for you raptor users (retail)

Sharky Forums


Results 1 to 4 of 4

Thread: for you raptor users (retail)

  1. 06-25-2003, 09:35 PM #1
    pudad
    pudad is offline
    Mako Shark pudad's Avatar
    Join Date
    Jan 2002
    Posts
    3,701

    for you raptor users (retail)

    http://forums.2cpu.com/showthread.php?s=&threadid=38860
    Reply With Quote Reply With Quote
  2. 06-26-2003, 06:41 AM #2
    BremenCulhaven
    BremenCulhaven is offline
    Hammerhead Shark BremenCulhaven's Avatar
    Join Date
    Aug 2001
    Location
    Florida
    Posts
    1,301

    Re: for you raptor users (retail)

    Originally posted by pudad
    http://forums.2cpu.com/showthread.php?s=&threadid=38860
    Like the old FastTrack66 trick. Just had to use a 100ohm resistor on that controller though and flash the bios.
    e6600 o/c 3.6Ghz| Evga 680i | XMS2 Dominator 2GB | 2 150GB Raptors RAID0 | XION 103 | Plextor 740A

    AMD 2500+ barton@3200+ o/c| pc3700 1GB Infineon/Micron CAS2| Radeon 9500 128mb mod/9700| Abit AN7 | Maxtor 120GB/200GB | Logitech Z-560 | Audigy gamer hacked 2 Audigy2 | Linksys router| 22" 2020u

    2nd system:
    AMD1700+| 512mb pc3700 Infineon/Micron CAS2| Xtasy Cinema (Geforce2 mx400)| Epox 8rda+| WD 20GB, 80GB Maxtor| Yamaha YST-M10| onboard sound| Plextor 12/10/32a| 19" Princeton
    Reply With Quote Reply With Quote
  3. 06-27-2003, 08:30 AM #3
    ewitte
    ewitte is offline
    gran tiburón blanco ewitte's Avatar
    Join Date
    Jul 2002
    Location
    Houston, TX mostly. Lima, Peru partiallly.
    Posts
    7,394

    Re: Re: for you raptor users (retail)

    Originally posted by BremenCulhaven


    Like the old FastTrack66 trick. Just had to use a 100ohm resistor on that controller though and flash the bios.
    And you could test it by putting the resister directly into the pins on the middle ide connector. When I did the FastTrack66 hack the first pin combination did not work. However the second one did. After a while I soldered it on.

    Eric
    http://forum.vmcloudhost.net (.com/.org)
    Reply With Quote Reply With Quote
  4. 06-27-2003, 05:31 PM #4
    BremenCulhaven
    BremenCulhaven is offline
    Hammerhead Shark BremenCulhaven's Avatar
    Join Date
    Aug 2001
    Location
    Florida
    Posts
    1,301

    Re: Re: Re: for you raptor users (retail)

    Originally posted by ewitte


    And you could test it by putting the resister directly into the pins on the middle ide connector. When I did the FastTrack66 hack the first pin combination did not work. However the second one did. After a while I soldered it on.

    Eric
    Same here I just soldered it on, my brother now has the hacked card and runs a RAID.
    e6600 o/c 3.6Ghz| Evga 680i | XMS2 Dominator 2GB | 2 150GB Raptors RAID0 | XION 103 | Plextor 740A

    AMD 2500+ barton@3200+ o/c| pc3700 1GB Infineon/Micron CAS2| Radeon 9500 128mb mod/9700| Abit AN7 | Maxtor 120GB/200GB | Logitech Z-560 | Audigy gamer hacked 2 Audigy2 | Linksys router| 22" 2020u

    2nd system:
    AMD1700+| 512mb pc3700 Infineon/Micron CAS2| Xtasy Cinema (Geforce2 mx400)| Epox 8rda+| WD 20GB, 80GB Maxtor| Yamaha YST-M10| onboard sound| Plextor 12/10/32a| 19" Princeton
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules