|
-
No-Name Cd-Rs vs. Good Brand Cd-Rs
Hey, it's been a while since I've been to this forum. Anyway, as simple as the subject line says, I was wondering if there is a real difference from noname cds to a good brand like... smartbuy, if those are a goodbrand anyway.
For example, I can get a 25cd spindle of smart buy cds, for 14.99 CDN, or maybe sonys even, OR I can get 50 no name cds for only five dollars more. The no-name cds are made in Taiwan if that means anything, thats what the guy on the phone said. For you Toronto residents, I'm talking about the factorydirect outlet on Kennedy and Brimley or Birchmount... yeah, anyway. Any help would be appreciated
Thanks
-
Tiger Shark
In general I don't think SmartBuys are very good and I consider them one of the cheap brands. I've gone through 2-50 spindles of smartbuys, both were 16x, and got mixed results. I found they could burned faster, like at 24x or sometimes higher, but had problems at 48x and found the cd's scratched pretty easily.
I too wonder how much of a difference the brand and type makes.
System 2 (Just built):
Epox 8RGA+
XP 2400+
512 MB KingMax DDR 400
80 GB WD 8 Mb
-
Tiger Shark
I stick with maxell or tdk, they have always been goood to me and if i watch the sales i can pick them up just as cheap as no name brands. As for performance ie coasters - i have no idea if the no names are any worse than the brand names or vice versa.
Pooter: Dell XPS 1710
Music: ATH-A900, Headsave Classic AMP
Games: Currently playing MW2, Dragon Age Origins, Assassins Creed II, Fallout 3
Gamertag Xbox: iluminatae
-
Thanks guys. Hook, I didn't really know if Smart Buys were good cds. The only is, not lately but there was a time about 1 year ago 'till about Christmas where I saw a lot of Smart Buy cd users. So I assumed that they were good since I see a lot of people using them.
iLuminatae, thanks for the advice. Today anyway, I purchased a 50-spindle no-name. It went for $20 CDN and I got a free CD-Labler with it. So I'm just trying them out. So far, 8 CDs, no coasters. They do feel cheap, they're not as flexible, they're not sealed well; I can see on the sides. But who knows, the labeling surface is blank so maybe they saved cost on making a face. I'm hoping as long as I keep them out of the sun and keep 'em cool, they should be fine. If they start acting up or whatever, I'll probably stick to Maxells......... TDKs are hard to find up here.
One of the things about rock 'n roll stars is that they're bigger than life, they're bigger than the audiance; a little intimidating. Isn't that off putting, doesn't that kill intamacy though? -Bono: "It does, absolutley... But you look great."
-
Tiger Shark
Now that I think about it, I found no real difference when I switched from those SmartBuys to Maxells. I don't think the brand of cd makes much of a difference. My cousin uses the cheapest ones he can find, like yours with no labels on the fronts, and I think he doesn't really have any problems with them.
System 2 (Just built):
Epox 8RGA+
XP 2400+
512 MB KingMax DDR 400
80 GB WD 8 Mb
-
Mako Shark
Really depends on what you are using them for. I burn alot of SVCD's, and find that the higher quality media does make a difference. I only buy high quality media now simply because cheaper CD-R's tend to skip and be corrupted more often than not (atleast for SVCD material).
AFAIK there are only about a dozen real CD MANUFACTURERS, and all other companies (i.e Sony, TDK, Memorex) buy the media and re-brand them. Like both TDK and Memorex use CMC Magnetics manufactured CD's. And in my book CMC is one of the worst manufacturers. I only buy Taiyo Yuden Manufactured media now, as it's easily one of the top 3 CD Media manufacturers when it comes to quality.
So yes, there is a difference in cheap media and quality media. Whether or not you should buy high quality media all really depends on what you want to use the media for. Personally I wont use the cheap stuff for anything, simply because I prefer that the material I burn lasts longer.
-
Tiger Shark
Whitman how do you what brands use Taiyo Yuden? Does it say it on the package somewhere or something?
System 2 (Just built):
Epox 8RGA+
XP 2400+
512 MB KingMax DDR 400
80 GB WD 8 Mb
-
Mako Shark
Originally posted by Captain Hook
Whitman how do you what brands use Taiyo Yuden? Does it say it on the package somewhere or something?
All Taiyo Yuden Manufactured media will say "Made in Japan" on it somewhere, and AFAIK they are the only ones with that on the cake-box. Plus their cake-boxes usually have a "screw on cap" on the top of the lid (although I recently bought a box with-out this look). You can always use a small app to identify the media such as "CDR-ATIP Reader" (would require you to buy the media first of course).
I almost always buy FujiFilm brand though, and they use Taiyo Yuden Media. BestBuy.com just had a box of 100 on sale for $24.99 with a $15 Mail in Rabate (so I stocked up on those suckers ) --edit-- In fact they are on sale again for $24.99, but without the $15 mail in reabte.
Example of what Taiyo Yuden cake-boxes look like:
Last edited by JustW; 07-03-2003 at 09:39 AM.
-
Tiger Shark
Oops, I realized I'm using Memorex cds, not Maxells. I am not very happy with these at all and won't buy any more Memorex. I think the next ones I get will either be those SmartBuys (they're damn cheap) or Maxell.
System 2 (Just built):
Epox 8RGA+
XP 2400+
512 MB KingMax DDR 400
80 GB WD 8 Mb
-
I have used TDK rebranded media since near the begining of CD Burning (for consumers anyway) and i have had 0 issues with them, where as almost every other manuf i have used has had issues with disk finishing burns (with or without errors like buff under-run) or general media life-span issues (such as the reflective coating starting to flake even with no use)
I will have to give these Taiyo Yuden cd's a shot, but TDK has always worked for me
-
Tiger Shark
i've always used princo cdrs and cdrws.
well not always..back in the early burning days i used whatever was on sale or cheap.
-
If you can find them, go for Disc Power spindles. They are pretty cheap and I have yet to burn a coaster with them.
System: AMD Barton 2500+ w/ThermalTake Silent Viking II |Epox 8RDA+ |1Gb KingstonHyperX PC3000 |Palit Daytona Geforce3Ti200 w/128mb ddr |Terratec DMX6Fire 24/96 |2x Seagate Barracuda IV 80Gb |Lite-On CD-RW 40/12/40 |Eizo Flexscan F730
-
I have burned hundreds of Memorex CDs and have never had a single problem with them. Ever. This last weekend CompUSA had a deal to buy 90 CDs for $10 - that's hard to beat . . .
-
Expensive Sushi
have a peep at cdreaks.com they will tell you the good, the bad and the ugly of cd media (and even dvdr media 2
-
Tiger Shark
Originally posted by JustWhitman
AFAIK there are only about a dozen real CD MANUFACTURERS, and all other companies (i.e Sony, TDK, Memorex) buy the media and re-brand them. Like both TDK and Memorex use CMC Magnetics manufactured CD's. And in my book CMC is one of the worst manufacturers. I only buy Taiyo Yuden Manufactured media now, as it's easily one of the top 3 CD Media manufacturers when it comes to quality.
The 100-pack of TDK 48X CD-R's that I've recently purchased were made by Ritek, not CMC Magnetics. On the other hand, the Imation CD-R's that my brother had been using were indeed CMC Magnetics media. Neither of those two CD-R manufacturers (CMC, Ritek) are considered to be "good", according to the pros.
Thus, I will use my TDKs for practice burns - and I will buy a Taiyo Yuden-manufactured brand for the more serious stuff.
Last edited by Nasty; 08-01-2003 at 03:20 PM.
MY CURRENT RIGS:
Main Rig: Intel Core 2 Duo E6750 processor, Intel DP35DP, 2GB Corsair TWIN2X2048-6400C5DHX kit @ DDR2-800/5-5-5-18, BFG 8800GT OC PCI-e @ factory-set clocks, 500GB Seagate 7200.10 SATA hard drive, Samsung S203N SATA and Lite-On 160P6S IDE DVD burners, X-Fi XtremeMusic
Guest Rig: Intel P4/2.8C, Intel D865PERL, 2GB PC3200, GeForce 6800GT AGP, WD1200JB, Sony 810A DVD burner
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|