The long-awaited pics of my cooling

Sharky Forums


Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: The long-awaited pics of my cooling

  1. #1
    Hammerhead Shark xDUCK's Avatar
    Join Date
    Dec 2002
    Location
    Vancouver, BC, Canada
    Posts
    2,992

    The long-awaited pics of my cooling

    Hey hey,

    I finally got my a$$ in gear and uploaded these... Anyway, (as some of you know), the rig illustrated in this picture is now dead (but survived all of the testing in the pictures fine - it died 2 days later). Anyway... Here it is, please pay your respects to the late NF7-S.

    And yes, there is quite a bit of ghetto action going on here (credit card fitting, etc ).









    Edit: Btw, the pictures where the copper tube is attached to the Radeon... Yes, that is direct die cooling (water touching the card itself, nothing between the water and the metal ).
    Last edited by xDUCK; 09-03-2003 at 07:21 PM.

    Anything's Hot Swappable if you're fast enough.

    Owner of zeroBel.com.

    [ My rig ]
    24/7: 260FSBx9.5 CPU Interface Enabled 1:1 2-2-2-11 (2.0v VDD, 3.4v Vdimm)

    NF7-S rev2.0 C1 d10 / 2500+ AQXEA SPMW "9" "27" / 256mb KHX3200 (BH-5) + 2x256mb Corsair 3200LL (also BH-5) / 80gb/7200/2mb IBM Deskstar / 80gb/7200/8mb Seagate SATA / ATI Radeon 9800 Pro 128 / 22" NEC FP2141-BK / Sennheiser HD570

    Sharky Extreme 3DMark Team


    Official member of the Big_Mac-is-generous club!

  2. #2
    Hammerhead Shark meat322's Avatar
    Join Date
    Jul 2001
    Location
    Hampton,Ga.
    Posts
    2,144
    damn!! you must'uv been really board

  3. #3
    Hammerhead Shark xDUCK's Avatar
    Join Date
    Dec 2002
    Location
    Vancouver, BC, Canada
    Posts
    2,992
    Originally posted by meat322
    damn!! you must'uv been really board
    Nope, just looking for a way to squeeze a few extra mhz out of my system.

    Any other comments? I mean, come on, lots of views, and only 1 reply?

    Anything's Hot Swappable if you're fast enough.

    Owner of zeroBel.com.

    [ My rig ]
    24/7: 260FSBx9.5 CPU Interface Enabled 1:1 2-2-2-11 (2.0v VDD, 3.4v Vdimm)

    NF7-S rev2.0 C1 d10 / 2500+ AQXEA SPMW "9" "27" / 256mb KHX3200 (BH-5) + 2x256mb Corsair 3200LL (also BH-5) / 80gb/7200/2mb IBM Deskstar / 80gb/7200/8mb Seagate SATA / ATI Radeon 9800 Pro 128 / 22" NEC FP2141-BK / Sennheiser HD570

    Sharky Extreme 3DMark Team


    Official member of the Big_Mac-is-generous club!

  4. #4
    Hammerhead Shark bahocale's Avatar
    Join Date
    Aug 2002
    Posts
    1,202
    You weren't lying when you said ghetto.
    Lian Li PC-65|Vantec Nexus|Ultra Xconnect Power Supply
    Epox 8RDA+|XP 2500|SLK-900U|92mm Stealth|512mb Corsair XMS PC3200C2|ATI Radeon 9600PRO
    Samsung 16X DVD|Lite-on 52*24*52 CD-RW|NEC ND-2500A|Seagate Barracuda ATA IV 60gb
    Klipsch ProMedia 5.1|Audigy 2|Sennheiser HD 497
    NEC 19" FE991SB-BK

    Alienware Sentia (lappy)

    Intel® Pentium® M 725 1.6GHz 2MB L2 Cache 400MHZ FSB | Intel® 855GME+ICH4M | Intel® PRO/Wireless 2200 Network Connection | 512MB DDR PC-2700 | Hitachi 40GB 7200 RPM ATA100 with 8MB Cache | 12.1" Wide-XGA 1280x800 LCD | Intel® Extreme Graphics 2 |Sound Blaster Pro Compatible 5.1 Digital Audio | 6X Dual Layer DVD+/-RW / 24X CD-RW

  5. #5
    Hammerhead Shark |_053|2's Avatar
    Join Date
    Jun 2003
    Location
    Las Vegas, Nevada
    Posts
    1,519
    awesome cooling setup!!! how many 3dmarks does this new addition get you?
    CPU Athlon xp 2500+ at 2.43GHz
    MainBoard PC CHIPS M848A Mainboard
    RAM Corsair XMS 1.5GB PC 3200
    HDD Maxtor Maxline Plus II - 250GB
    GPU ATI Radeon 9800pro
    Sound Creative Audigy 2 ZS/Klipsch THX 4.1's
    PSU OCZ StealthStream 500Watt PSU
    19,046 3dmark01 | 6465 3dmark03 | Sharky's Extreme 3DMark Team!

  6. #6
    Hammerhead Shark xDUCK's Avatar
    Join Date
    Dec 2002
    Location
    Vancouver, BC, Canada
    Posts
    2,992
    Originally posted by bahocale
    You weren't lying when you said ghetto.
    Hey, could you expect any less (or rather, any more ) from me?

    Anything's Hot Swappable if you're fast enough.

    Owner of zeroBel.com.

    [ My rig ]
    24/7: 260FSBx9.5 CPU Interface Enabled 1:1 2-2-2-11 (2.0v VDD, 3.4v Vdimm)

    NF7-S rev2.0 C1 d10 / 2500+ AQXEA SPMW "9" "27" / 256mb KHX3200 (BH-5) + 2x256mb Corsair 3200LL (also BH-5) / 80gb/7200/2mb IBM Deskstar / 80gb/7200/8mb Seagate SATA / ATI Radeon 9800 Pro 128 / 22" NEC FP2141-BK / Sennheiser HD570

    Sharky Extreme 3DMark Team


    Official member of the Big_Mac-is-generous club!

  7. #7
    Hammerhead Shark xDUCK's Avatar
    Join Date
    Dec 2002
    Location
    Vancouver, BC, Canada
    Posts
    2,992
    Originally posted by |_053|2
    awesome cooling setup!!! how many 3dmarks does this new addition get you?
    None, I never ran 3dmark. Since I was doing direct-die cooling, I had to cover the pins around the 9800's core, and apparently they don't like being covered. I got artifacts even in Windows so I didn't even bother with 3dmark.

    The NB watercooling got me 5 extra FSB (stable). I filled it with ice and topped it off with water.

    Anything's Hot Swappable if you're fast enough.

    Owner of zeroBel.com.

    [ My rig ]
    24/7: 260FSBx9.5 CPU Interface Enabled 1:1 2-2-2-11 (2.0v VDD, 3.4v Vdimm)

    NF7-S rev2.0 C1 d10 / 2500+ AQXEA SPMW "9" "27" / 256mb KHX3200 (BH-5) + 2x256mb Corsair 3200LL (also BH-5) / 80gb/7200/2mb IBM Deskstar / 80gb/7200/8mb Seagate SATA / ATI Radeon 9800 Pro 128 / 22" NEC FP2141-BK / Sennheiser HD570

    Sharky Extreme 3DMark Team


    Official member of the Big_Mac-is-generous club!

  8. #8
    GSD on patrol kenrippy's Avatar
    Join Date
    May 2001
    Location
    Orange Co. CA
    Posts
    4,205
    Dood, you're SICK! gotta hand it to ya though, someone had to try it

    Q6600 "G0" @ 3.6ghz (400x9) - tuniq tower - IP35 Pro - 4x1gb ballistix ddr800 - Thermaltake W0128RU 650w - 2x74gb raptors raid-0 (OS drive)
    heat ebay



  9. #9
    Hammerhead Shark FunctionX's Avatar
    Join Date
    Dec 2002
    Location
    Mount Pleasant, Michigan
    Posts
    1,756
    Ghettolicious.

  10. #10
    Great White Shark mikeysg's Avatar
    Join Date
    May 2003
    Posts
    8,753
    xDUCK, that's taking ghetto to a new high (or it is low? ). Hope you've got better luck with the Intel you're getting.
    Save Ana
    http://www.jpages.net/HelpAna.htm

    Main Rig - All AMD build: R9 3900X | GB X570 Aorus Xtreme | 2x 8GB 3600CL17 Patriot ViperRGB | Sapphire Nitro+ RX 6900 XT | 256GB Sabrent Rocket NVMe M.2 (OS) | 4TB Samsung 860 EVO SATA SSD | 2TB Samsung QVO SATA SSD | 2x 1TB Samsung 850 EVO | 6TB WD Black | Corsair HX 1000 Platinum | CM H500M | Samsung LC49HG90DMEXX 32:9 | iFi Micro iDSD BL | LG SL8YG Soundbar | 64bit Win10 Pro

  11. #11
    Hammerhead Shark a ronin's Avatar
    Join Date
    Jan 2003
    Location
    Somewhere cold
    Posts
    1,735
    Originally posted by FunctionX
    Ghettolicious.


    Ghetto-fabulous!

    Good work xDuck, personally I would have just hooked up an AC machine next to it and called it a day.
    MBP 2.13 C2D

  12. #12
    Great White Shark Un4given's Avatar
    Join Date
    Oct 2000
    Location
    Salt Lake City, UT United States
    Posts
    22,553
    If we had a ghetto mod award around here, xDuck would definitely deserve to be a recipient.
    Prince of the OC Crusaders

    Intel i7 3.2GHz @ 4.24GHz
    Cooler Master V8
    Asus P9X79 Pro
    16GB Patriot Viper Extreme DDR3-1600 (quad channel)
    HIS R9 290X @1050MHz
    Asus 20x DVD-RW DL DVD-RW

  13. #13
    Hammerhead Shark xDUCK's Avatar
    Join Date
    Dec 2002
    Location
    Vancouver, BC, Canada
    Posts
    2,992
    Heh, forgot to include this one... Who needs fittings?



    Now, THIS picture warrants some sort of award, even if I do say so myself.

    Anything's Hot Swappable if you're fast enough.

    Owner of zeroBel.com.

    [ My rig ]
    24/7: 260FSBx9.5 CPU Interface Enabled 1:1 2-2-2-11 (2.0v VDD, 3.4v Vdimm)

    NF7-S rev2.0 C1 d10 / 2500+ AQXEA SPMW "9" "27" / 256mb KHX3200 (BH-5) + 2x256mb Corsair 3200LL (also BH-5) / 80gb/7200/2mb IBM Deskstar / 80gb/7200/8mb Seagate SATA / ATI Radeon 9800 Pro 128 / 22" NEC FP2141-BK / Sennheiser HD570

    Sharky Extreme 3DMark Team


    Official member of the Big_Mac-is-generous club!

  14. #14
    Registered User ptamim's Avatar
    Join Date
    Jan 2002
    Location
    Philly, PA
    Posts
    342
    Yo man, is that a bong hooked up to the CPU ?!

    Dr. T...
    Keep it strong my man !

  15. #15
    Great White Shark rimmerchant's Avatar
    Join Date
    Apr 2003
    Posts
    8,983
    hey dude, you got the same case as me and
    I take it that's a MSI mobo (I know cause I have one)

    and the video card is a
    Radeon 9700 or 9800?


    hmm I got same case, msi mobo, radeon 9700.
    I need more pics so I can do the same thing as you

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •