|
-
Hammerhead Shark
Causes of hard drives dying
In the past, a hard drive "crash" was often associated with the read/write heads on the hard drive physically "crashing" into the platter, thus scratching the platter and making it unusable. I understand that this can still happen every once in a while, but given that most people don't jar their hard drives around alot, this doesn't seem to be very common anymore.
Other things such as a piece of debris flying around inside the drive chamber, circuit failure, or a power surge sounds to me like much more likley causes of a hard drive going bad.
So, my question is, what are the more common causes?
-
Great White Shark
I guess heat would be one.
i7 920 @3GH, P6T Deluxe V2, OCZ HP 6GB(3x2)Kit(7-7-7-16), 128GB Patriot SSD, 250GB SATA(7200)Hitachi, WD 500gb, 1000W BFG PSU, SATA Pioneer DVD CD burner, XFX5870 XXX edition(900/1300), LG LED 2350V, XFI Titanium Fatal1ty champion, Logitech X-540, Lian Li PC-B70 Full Tower Case, Win7 HP.
-
Great White Shark
My guess would be the failure of the read/write head actuator. Not that the heads hit the platter, but that actuator that moves the heads back and forth.
Prince of the OC Crusaders
Intel i7 3.2GHz @ 4.24GHz
Cooler Master V8
Asus P9X79 Pro
16GB Patriot Viper Extreme DDR3-1600 (quad channel)
HIS R9 290X @1050MHz
Asus 20x DVD-RW DL DVD-RW
-
8 Wheels Move The Soul
Originally posted by lonewolfroger
I guess heat would be one.
Heat is one of the top reasons if you'd ask me. Quite a few recent cases have built-in Hard Drive vents/fans just for this reason.
#1) Big Box
Core 2 Quad Q9550 - Asus P5Q3 - 8GB DDR3 1333 - GeForce 550Ti - Win 7 Pro
#2) IBM Thinkpad R51
Pentium M 1.6GHz - 1GB PC2700 - 80GB - Win 7 Pro
#3) Macbook Pro
2.4GHz Core i5 - 4GB - OS X Lion
#4) Rollerskates
Bont Quad Racer Carbon - Sure-Grip Avengers - Qube 8-Balls
Now Playing: Forza 4, Wipeout HD, Dead Space 2 (again!)
-
Tiger Shark
I don't know if this falls under circuit failure, but the drive motor can also burn out.
-
I believe that bearing failure can cause the spinning platters to jiggle on their rotational shafts and thus wobble around a bit. Since the heads are only a few microns above the rotating platters, a small undesired wobble can cause the heads to strike the platter surface.
-
Tiger Shark
Seeing that drives are all electro-mechanical devices; Its usually the mechanical parts that fail. Bad bearings, actuators, and others become stressed from just plain old usage. Combine that with heat and you have an even shorter lifespan for all the mechanicals in a drive.
Gigabyte GA-990FXA UD3 3.6x4 | 16gig Ram | Nvidia GTX550-TI | 60Gig SSD | running Kubuntu 64 bit
www.linuxloader.com
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|