|
-
Hammerhead Shark
 Somethings up...help guys!
Ok, I restart my computer, thinking, oh yay, time to try to overclock. I enter the BIOS, and drop the multiplier to 7 and raise the FSB on the start of my long journey. I exit the BIOS, saving my settings. THe computer powers off, powers back up, and then teh moniter powers off... ...I restart, same thing happens, the moniter will not power on. I power off teh power supply, power back on, smae thing. Nothing is working, so I switch the CMOS, and power back on, same thing. MY computers fans are all spinning and the motherboard light is on, but the power and hdd LEDS are showing no activity. Any thoughts on what could be wrong
Soulfire:
Enermax FS-710B with 330 watt Enermax PSU/ 2500+ Barton at 210*11=2.31 GHz/ SLK-800 with Vantec Tornado/ Abit NF7-S ver. 2.0/ Sapphire Radeon 9800 Pro 128 MB/ 1*512 Corsair XMS PC3200/ Seagate 80 gig 7200 RPM/ Sony Black 16x DVD ROM/ Lite-On 52*24*52 Black CDRW/ Mitsumi Black FDD/ NEC FE990 19" / Altec Lansing 251/ Logitech Black SBD69 Optical/ Logitech Black Internet Keyboard/ Windows XP Home Edition
I'm a Sunbeam fanboy, are you?
"Audiophile in training"
-
ATI Fanboy
I think that you might have screwed up your BIOS.
Try re-setting the CMOS again using the motherboard jumper. Id that won't work then we have a problem.
.:|:. Thermaltake Xaser II A5000A Case
.:|:. OCZ PowerStream 470W PSU
.:|:. Chaintech VNF3-250 nForce3 250
.:|:. AMD64 3000+ 2.0Ghz @ 2410Mhz
.:|:. Zalman CNPS7000-Cu Copper HSF
.:|:. OCZ 1GB PC-3500 EB Platinum Edition @ 240Mhz 3-2-2-10 (2.9V)
.:|:. ATI Radeon x800 Pro 256MB @ 530Mhz/560Mhz
.:|:. Creative Audigy 2 ZS
.:|:. Klipsch Promedia 5.1 Ultras
3DMark01 - 25617
Join Fix-it.org Forums!
-
Great White Shark
First turn off all power to your computer, hold down on your insert key, then power it up again, this should reset your cpu to default and allow you to get back in bio`s, if not and clearing cmos don`t work you might need a new bio`s chip.
i7 920 @3GH, P6T Deluxe V2, OCZ HP 6GB(3x2)Kit(7-7-7-16), 128GB Patriot SSD, 250GB SATA(7200)Hitachi, WD 500gb, 1000W BFG PSU, SATA Pioneer DVD CD burner, XFX5870 XXX edition(900/1300), LG LED 2350V, XFI Titanium Fatal1ty champion, Logitech X-540, Lian Li PC-B70 Full Tower Case, Win7 HP.
-
Hammerhead Shark
Soulfire:
Enermax FS-710B with 330 watt Enermax PSU/ 2500+ Barton at 210*11=2.31 GHz/ SLK-800 with Vantec Tornado/ Abit NF7-S ver. 2.0/ Sapphire Radeon 9800 Pro 128 MB/ 1*512 Corsair XMS PC3200/ Seagate 80 gig 7200 RPM/ Sony Black 16x DVD ROM/ Lite-On 52*24*52 Black CDRW/ Mitsumi Black FDD/ NEC FE990 19" / Altec Lansing 251/ Logitech Black SBD69 Optical/ Logitech Black Internet Keyboard/ Windows XP Home Edition
I'm a Sunbeam fanboy, are you?
"Audiophile in training"
-
Hammerhead Shark
-
Great White Shark
Originally posted by knuckles644
Well, I reset my CMOS (I didn't have it in the right position before ) but still nothing. Powers up, acts normally, and the moniter won't turn on. I'm going to try my other moniter, just to see if it is that.
Did you try the insert key thing, I posted. Sometimes it will bring it back to life, if cmos don`t work.
Last edited by lonewolfroger; 09-28-2003 at 07:50 PM.
i7 920 @3GH, P6T Deluxe V2, OCZ HP 6GB(3x2)Kit(7-7-7-16), 128GB Patriot SSD, 250GB SATA(7200)Hitachi, WD 500gb, 1000W BFG PSU, SATA Pioneer DVD CD burner, XFX5870 XXX edition(900/1300), LG LED 2350V, XFI Titanium Fatal1ty champion, Logitech X-540, Lian Li PC-B70 Full Tower Case, Win7 HP.
-
Hammerhead Shark
-
Not Wurm
yeah I would start with a multi of 10...
-
Great White Shark
I don`t know if that was it or not, I have found if you don`t change too many settings in bio`s, use the exit and save function and don`t reset too many times in a short period of time. You should not have too much trouble. Edit to add, IMO, I think that if you go to far out of the peramitors(sp) set by Nvidia on the chipset, then you start to have problems.
Last edited by lonewolfroger; 09-28-2003 at 08:08 PM.
i7 920 @3GH, P6T Deluxe V2, OCZ HP 6GB(3x2)Kit(7-7-7-16), 128GB Patriot SSD, 250GB SATA(7200)Hitachi, WD 500gb, 1000W BFG PSU, SATA Pioneer DVD CD burner, XFX5870 XXX edition(900/1300), LG LED 2350V, XFI Titanium Fatal1ty champion, Logitech X-540, Lian Li PC-B70 Full Tower Case, Win7 HP.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|
Reply With Quote
All is well, I'm going home now. But, when it wouldn't power on in the first place, do you think that's because I set my multi too low? I guess I should only drop it to around 10 or so
Thanx everybody