|
-
Urgent Laptop problem
I was attempting to add more RAM to my mother's laptop, but I noticed that I had purchased the incorrect type. After putting everything back together, the laptop would not boot. I've searched for solutions all over the internet, and can't find anything. The fan doesn't turn on, and there is no hard drive activity. I rechecked all connections that I am aware of, and nothing seems loose or out of place. I even removed the old thermal paste on the heatsink and added new paste. When I hit the on button, the power light is lit up, and heat is giving off by the heat sink. This is all that seems to happen. Any ideas?
Current Rig: Q6600 @2.8GHz | Zalman CNPS 9700 | 6 GB Corsair XM2 DDR2 RAM @ 736 MHz | 2 x 150 GB Raptors Raid 0 | Asus Dark Knight 4870 512 MB | Gigabyte EP45-U3DL Motherboard | ASUS VW266H Panel | Lian Li PC-V1200Bplus
XBL Gamertag: Recursivity
http://xclite.net
Now Playing: Left4Dead, Team Fortress 2, Killing Floor, Dawn of War 2
-
I swear, over half the time that I post something here for help I solve it 5 seconds later. I tried reseating the RAM for the third time, and it booted like nothing was wrong. Thanks to anybody who read this.
Current Rig: Q6600 @2.8GHz | Zalman CNPS 9700 | 6 GB Corsair XM2 DDR2 RAM @ 736 MHz | 2 x 150 GB Raptors Raid 0 | Asus Dark Knight 4870 512 MB | Gigabyte EP45-U3DL Motherboard | ASUS VW266H Panel | Lian Li PC-V1200Bplus
XBL Gamertag: Recursivity
http://xclite.net
Now Playing: Left4Dead, Team Fortress 2, Killing Floor, Dawn of War 2
-
Mako Shark
You shouldnt have had to do so much to just get to the ram. Not the best idea on laptops to mess with the cpu for future reference as the pins on the cpu are very easy to damage ..... Just as a note though if you hot glue the mobo or reseat the cpu in future sometimes you need to leave the laptop overnight to dry as small amounts of moisture even from residue fingerprints can cause problematic booting ..
As a tip, when taking a laptop to pieces have a large piece of paper. Write on the paper where the screws came from. Make notes one the paper which part you've taken out in which order. Really helps when putting it back together. There's nothing worse than rebuilding a laptop and being left with a couple of screws and thinking "where the hell did these come from, i wonder if they're important?"
Anyway glad you got it sorted
Compaq A910em: T2330 dual core 1.6Ghz, X3100 384MB GPU, 160GB sata HDD, 2GB RAM
Gaming rig: Asus Striker II, Coolermaster GX 750w, E4600 @ 2.4Ghz, 2.5GB RAM, Zerotherm FZ 120, 9500GT 1GB
Server: Mac mini running W23k Server - 1.8Ghz dual-core, 1GB RAM, 1x80GB, 2x500GB externals + LTO1 tape backup
An important petition, regarding your human rights:
https://www.change.org/en-GB/petitio...r-both-genders
-
Yeah I really shouldn't have had to go near the cpu, to be honest. Most laptops I've disassembled have required a simple panel to be unscrewed, but not this beast. Not only did the heatsink have to be unscrewed, so did the hard drive and keyboard... PITA.
Current Rig: Q6600 @2.8GHz | Zalman CNPS 9700 | 6 GB Corsair XM2 DDR2 RAM @ 736 MHz | 2 x 150 GB Raptors Raid 0 | Asus Dark Knight 4870 512 MB | Gigabyte EP45-U3DL Motherboard | ASUS VW266H Panel | Lian Li PC-V1200Bplus
XBL Gamertag: Recursivity
http://xclite.net
Now Playing: Left4Dead, Team Fortress 2, Killing Floor, Dawn of War 2
-
Another handy thing to have if you can get one, is a service manual for the laptop.
I found my Inspiron 9400 free at a this site that has loads of laptop (and other) service manuals.
-
I seriously love happy endings when it comes to computers
Alienware Area-51 M5750 17" WUXGA Portable
Core 2 Duo 2.16GHz 2GB RAM PC5300 667MHz
ATI X1800 Radeon 256MB (2) 80GB 7200 rpm
Alienware Area-51 Tower - Water Cooled
ABIT AA8XE PCI-e Intel P4 550 3.4Ghz
1GB RAM PC4200 DDR2 ASUS Geforce 6800 Ultra
Lenovo X1 Carbon 3444-25U
Intel Core i7-3667U Processor
4 GB PC3-10600 DDR3L SDRAM 1333MHz
256GB SanDisk HD Intel HD 4000 Graphics
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|