sisoft sandra scores

[Darth]

hey guys, I was messing with my fsb, and came up w/ this..sorry I don't know how to put the pics up.. here's the numbers

cpu- 10x100 2781/1380 10x104 2862/1397
mem- 143 2-2-2 457/539 143 2-2-2 389/447

the cpu scores went up with oc' but why would the mem scores drop w/ mem at same setting? this is a 900 tbird w/a7v..I think the chip maxes at 1040, 1050 not stable

------------------
~OC CRUSADERS~

[This message has been edited by Darth (edited March 05, 2001).]

[sapasion]

You could do what I did. Merely take the screenshots and post them on a free space.

I assume you know about using the print screen method.

------------------
Prince of the OC Crusaders
Mr.White's Sharky's Showcase
My P3 700@1090 Screenshots

[Darth]

Originally posted by sapasion:
You could do what I did. Merely take the screenshots and post them on a free space.

I assume you know about using the print screen method.

actually yes I did save them..but I did not think of using a free space site..I'll try thanks

------------------
~OC CRUSADERS~

[sww]

Are you sure you were still at 2-2-2? Perhaps with your FSB at 104, your BIOS set it back to 3-2-2? Or slower? How are you determining speed? Hard set? Or SPD?

Originally posted by Darth:
hey guys, I was messing with my fsb, and came up w/ this..sorry I don't know how to put the pics up.. here's the numbers

cpu- 10x100 2781/1380 10x104 2862/1397
mem- 143 2-2-2 457/539 143 2-2-2 389/447

the cpu scores went up with oc' but why would the mem scores drop w/ mem at same setting? this is a 900 tbird w/a7v..I think the chip maxes at 1040, 1050 not stable

------------------
Something like 37% of statistics are made up out of thin air.

[sapasion]

Originally posted by sww:
Are you sure you were still at 2-2-2? Perhaps with your FSB at 104, your BIOS set it back to 3-2-2? Or slower? How are you determining speed? Hard set? Or SPD?

Good point!
Those memory scores should not have dropped by raising the FSB.

------------------
Prince of the OC Crusaders
Mr.White's Sharky's Showcase
My P3 700@1090 Screenshots

[Darth]

I checked again its still says 143 2-2-2, the a7v options are spd, user define or the defined settings 7ns 143 2-2-2 thats what I'm using.. here's the best I could do so quickly.. I'm not even sure that these are the only sisoft pics you would need to see..I'm new with it..

can't make the link sorry.. go here www.thesportingplace.com

------------------
~OC CRUSADERS~

[This message has been edited by Darth (edited March 05, 2001).]

[sww]

That's odd. Did you run the tests at least 2-3 times? I never trust a bench until I run it 3 times cause there is too much variability. I assume you doublechecked to make sure nothing was going on in the background when you did the test @104FSB? That's a big drop, though. Even dropping to Cas3 shouldn't produce a drop that big.

------------------
Something like 37% of statistics are made up out of thin air.

[Darth]

Originally posted by sww:
That's odd. Did you run the tests at least 2-3 times? I never trust a bench until I run it 3 times cause there is too much variability. I assume you doublechecked to make sure nothing was going on in the background when you did the test @104FSB? That's a big drop, though. Even dropping to Cas3 shouldn't produce a drop that big.

yeah nothing running in the background, and I'll run them again..and post them tomorrow..
whats the codes to make a link work?

------------------
~OC CRUSADERS~

[sww]

Apparently the code is such that you can just type the site: www.whatever.com

Or to do it properly enclose url=www.whatever.com in []brackets and use [/url] to turn it off. Just put the text you want to link on in between.

Also, that board will set your RAM back to 100MHz if you fail to post sometimes. I know you said you checked it, but take a look at your BIOS again and reassure yourself that on the Advanced page the RAM is set to 133MHz instead of 100MHz.

Originally posted by Darth:
yeah nothing running in the background, and I'll run them again..and post them tomorrow..
whats the codes to make a link work?

------------------
Something like 37% of statistics are made up out of thin air.

[Darth]

well I reran it a few times..it seems the mem score went up a bit, but its still down.. 403/468
If I want to write my 900@1004 screenshots and link it to the url..how would I do that? I'm not following you when you say to turn it off?

------------------
~OC CRUSADERS~

[Darth]

ok never mind all of this,,I figured out what happened..the system was not set to optimal performance..now the numbers are up much better...even though I don't think they are that great..compared to sapasion's anyway..

sisoft screenshots--> www.thesportingplace.com

------------------
~OC CRUSADERS~

[sapasion]

It seems to me that as good as crucial or micron ram are, that Mosel whether as Mushkin or memman or whatever gives higher benchmarks at the same FSB and cas settings.

For example my own memory benchs are much higher than these: http://www.extremeoverclocking.com/r...lot1-P3_3.html

------------------
Prince of the OC Crusaders
Mr.White's Sharky's Showcase
My P3 700@1090 Screenshots

[sww]

my 900@1004 screenshots


If you'll reply to this, you'll see the UBB codes that enabled this. I think that'll answer your question.

Originally posted by Darth:
well I reran it a few times..it seems the mem score went up a bit, but its still down.. 403/468
If I want to write my 900@1004 screenshots and link it to the url..how would I do that? I'm not following you when you say to turn it off?

------------------
Something like 37% of statistics are made up out of thin air.

[Darth]

Originally posted by sww:
my 900@1004 screenshots


If you'll reply to this, you'll see the UBB codes that enabled this. I think that'll answer your question.

thanks man, hey I look like newbie now..hehe

------------------
~OC CRUSADERS~