|
-
Hammerhead Shark
Best Fitting Radiator Inside PC-60
Subject says it all, which fits the best and where?
P4 2.4C @ 3.44Ghz , 285 FSB -- Asus P4C800-E -- 512 Mb Corsair PC4000 -- Radeon 9800np 445.5/398.3 Vmodded-- 2xRaptors in RAID 0 -- Watercooled CPU, GPU and Northbridge -- Handcrafted Case
... And Folding Like No Tomorrow
-
Hammerhead Shark
Re: Best Fitting Radiator Inside PC-60
Originally posted by zackbass
Subject says it all, which fits the best and where?
i would suggest the Super Cube and you can put it up right in between the psu and the drive cages at the top of the case
also, you can cut a blowhole at the top right above the radiator at the top and put a 120mm fan there!
-
Hammerhead Shark
would I have to cut the metal that connects the PSU sides to the large drive cage? I don't have any problem with cutting as I have done it plenty, but would like to know how it fits. Also, will a radiator fit in the HDD cage space if I take out the bottom rails? I already have fans there, all I gotta do is reverse all the case fans.
P4 2.4C @ 3.44Ghz , 285 FSB -- Asus P4C800-E -- 512 Mb Corsair PC4000 -- Radeon 9800np 445.5/398.3 Vmodded-- 2xRaptors in RAID 0 -- Watercooled CPU, GPU and Northbridge -- Handcrafted Case
... And Folding Like No Tomorrow
-
Hammerhead Shark
umm i guess you would have to cut the sides!
maybe a better place wwould be down at the bottom and you can remove the HDD cage and out your radiator down there beside the 2 fans (yes i know what you mean, i have a pc69)
anyways - that is prob what i will do when my cube arrives
good luck and if you got anymore questions, then feel free to ask
also there are the Black Ice Extreme and the Black Ice Prime - these are also very good - but i think the cube is the top one!
i am sure the Black Ice's could fit easily on the bottom of the case, and you could put a fan on the top side and have it sucking air off
-
Hammerhead Shark
Thanks, I'll probably order up a cube along with copper stock from Danger Den tomorrow.
P4 2.4C @ 3.44Ghz , 285 FSB -- Asus P4C800-E -- 512 Mb Corsair PC4000 -- Radeon 9800np 445.5/398.3 Vmodded-- 2xRaptors in RAID 0 -- Watercooled CPU, GPU and Northbridge -- Handcrafted Case
... And Folding Like No Tomorrow
-
This is a nice rig to get some ideas from.
Knowledge is useless, it’s what you do with it that counts.
-
Hammerhead Shark
http://www.l33tpeeps.com/caffeine/ar...affeine_08.htm
here is what i was talking about with the Cube - the picture is like half way down the page - it is fit in between the PSU and cdrom cage!
check it out
-
Hammerhead Shark
That is the one I saw in Maximum PC that gave me the thought of water cooling my PC-60. I look at it and gazed in wonder how well the radiator fit!
P4 2.4C @ 3.44Ghz , 285 FSB -- Asus P4C800-E -- 512 Mb Corsair PC4000 -- Radeon 9800np 445.5/398.3 Vmodded-- 2xRaptors in RAID 0 -- Watercooled CPU, GPU and Northbridge -- Handcrafted Case
... And Folding Like No Tomorrow
-
Hammerhead Shark
Originally posted by zackbass
That is the one I saw in Maximum PC that gave me the thought of water cooling my PC-60. I look at it and gazed in wonder how well the radiator fit!
yeah, its like it was meant to be there!!!
oooo scary!
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|