|
-
Hammerhead Shark
Fan controller vs non adjustable fans.
Okay, so most likely a dumb question, but, the fans that are not adjustable, if connected to a controller, then I can control RPMs?????
I would like to think that I could, but I wanted to ask, if someone knows.
Thanks,
Phelan1777
Last edited by phelan1777; 12-16-2005 at 07:16 PM.
Reason: correction
QX6700 @ 2.9, 3.2, 3.4, not quite 3.7
Brd_122-CK-NF68-A1_EVGA
Opt_2X_Px-716SA_Plextor
Psu_SST_75ZF_SilverStone
Os_Xs_Os_&_Xp_Prp_XSOS
Box_Stacker_810_Cooler_Master
Ram_Crucial_Ballistix_PC28000
Vga_eVGA_8800GTS_ SLI_EVGA
Hdd_320GB_72K.10_74GB_Sata_Seagate/WD
Rd-30/Pa120.3/LiTtLe RiVeR G5! /2X MCW60s/MCW30
(My work in progress)
Stacker SLACKER Thread
I reject your reality and substitute it with my own. Adam- Myth Busters
-
Tiger Shark
Main Rig Undergoing surgery 
-
Hammerhead Shark
Thanks for the fast reponse U.
QX6700 @ 2.9, 3.2, 3.4, not quite 3.7
Brd_122-CK-NF68-A1_EVGA
Opt_2X_Px-716SA_Plextor
Psu_SST_75ZF_SilverStone
Os_Xs_Os_&_Xp_Prp_XSOS
Box_Stacker_810_Cooler_Master
Ram_Crucial_Ballistix_PC28000
Vga_eVGA_8800GTS_ SLI_EVGA
Hdd_320GB_72K.10_74GB_Sata_Seagate/WD
Rd-30/Pa120.3/LiTtLe RiVeR G5! /2X MCW60s/MCW30
(My work in progress)
Stacker SLACKER Thread
I reject your reality and substitute it with my own. Adam- Myth Busters
-
Tiger Shark
 Originally Posted by phelan1777
Thanks for the fast reponse U.
just to elaborate, the fan controller just varies the voltage that goes through the fan. and Power=VoltsxAmps so if your lowering the voltage its going to be putting out less power therefore spinning slower.
Last edited by UghMAS; 12-16-2005 at 10:22 PM.
Main Rig Undergoing surgery 
-
Hammerhead Shark
so any recommentdations for a 4+ fan controller?
I liked a Zalman one I saw.
QX6700 @ 2.9, 3.2, 3.4, not quite 3.7
Brd_122-CK-NF68-A1_EVGA
Opt_2X_Px-716SA_Plextor
Psu_SST_75ZF_SilverStone
Os_Xs_Os_&_Xp_Prp_XSOS
Box_Stacker_810_Cooler_Master
Ram_Crucial_Ballistix_PC28000
Vga_eVGA_8800GTS_ SLI_EVGA
Hdd_320GB_72K.10_74GB_Sata_Seagate/WD
Rd-30/Pa120.3/LiTtLe RiVeR G5! /2X MCW60s/MCW30
(My work in progress)
Stacker SLACKER Thread
I reject your reality and substitute it with my own. Adam- Myth Busters
-
Catfish
id say go for it, i got a vantec one b4 and 2 of the 4 controls blew up when the fan had an issue. i dont know if im the only one but ya.. that sucked. the other 2 still work
and yes... they BLEW up. that bigger sized square resistor type piece exploded and i found fragments at the bottom of my case. threw out those fans SO fast.
:: Intel E6750 w/ Zalman 9700 :: XFX 780i SLI :: eVGA 8800GT Superclocked :: AData 2 x 2GB DDR2 800mhz ::
:: NZXT Lexa (Piano Black) :: 3x 120mm & 3x 80mm
Got Tired of: Bioshock / Crysis
Loving: GRID and DMC4
Havent had time for: Finishing Spore (trying to kill Grok)
HEATWARE FEEDBACK
-
Tiger Shark
my favorite:
http://svc.com/bus-55-sl-24.html
http://svc.com/bus-54-bk-24.html
leds are a little bright but it is a top basic 4 fan controller. I LOVE it, i wish it was 9.99 back when i bought mine.
Last edited by UghMAS; 12-17-2005 at 01:50 AM.
Main Rig Undergoing surgery 
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|